Search results

So today i was trying to flash my gpu's bios (rx 580) and since it got dual bios so there was no risks So i switched to the other bios, flashed it, nothing wrong then today i tried to go back to the main bios and it seems like it got flashed too ? does the amdvbflash flash both bios ? Because...

So i was using my pc normally today and suddenly the pc have turned off and it the screen turned black without the pc closing So first i thought the cable moved from its place so i made sure everything is okay Also my cable is vga but i use vga to hdmi connector, i tried to connect the vga to...

I got an xfx rx 580 8gb, and noticed that the gpu clock when i run a stress test on it (furmark) is a bit low it is from 990-1050 mhz and the card should be at 1366 mhz its temps was 81c max After that i opened msi afterburner and set the power limit to +50% and that made the gpu clock like...

I found a really good deal for a hyper 212 evo but it have some missing things 2 of the 4 things that hold the standoff from the back of the motherboard are missing would that affect anything it is very cheap like 15$ it is worth it but i just wanted to ask if that will effect temps

So i have installed a fresh windows on this ssd form like 3 days and tested its speeds it was 330 mb on read and 300 in write, it was below the expectations then i have left it for like 2-3 days tried it today it gives me 340 on read and 30 on write that is worse now then i figured out i wasn't...

Psu : Seasonic s12ii 620w Gpu : XFX rx 580 8gb I have built this pc from 3 days and i have been facing this problem till now This problem is a bit weird because i don't know where is the problem First day of using i was gaming for 4 hours and light browsing at the end of the day i heard...

So i opened up hwinfo and saw the motherboard section seems like there is only 12v and 3.3v rails, then i checked the bios the same thing there is no 5v rail but the pc is working fine should i worry? my motherboard is : z77 d3h rev 1.2

So i have build my pc there is 2 pins have been bent in my mb socket but i bend them back and the cpu, dual channel all dimm slots are working fine Then i installed windows in my ssd tested some few games like i have seen in people benchmarks with the same specs they are getting like 180...

Yesterday i was playing for like 1 hour after that my gpu began to do click sounds and my display with all white with random colours after that i reseated the gpu and my case have like a clips to hold it i hold it with one clips after a reseated i forgot the other one and the same problem then...

My motherboard : z77 d3h rev 1.2 So where to start i entered the bios but i can't edit anything cpu ratio turbo ratio or anything on this motherboard is there a problem with the motherboard? Because i heard that the i7 3770 can be overclocked +400 mhz over the boost

So i wanted to know today if my mb or psu is faulty i opened my pc today and there are no beebs or anything So i had a molex connected to a fan but when i turn on the psu the fan doesn't work so i wanted to know can a fan work if it is connected to the psu with a molex without a mb

I got a z77 v-lx deal but the seller told me there is one of the bins on the socket that a very small part of it is cut off, but he told me it is working fine and all the ram slots are working fine with dual channel should i get it or not and will this effect overclocking or anything?

So i got an i7 860 today and when it reaches 70c on prime 95 , my pc crashes so is the problem from the cpu or what

So i got this motherboard z68xp-ud3 and it have a complicated legacy bios there was a bios that is a beta one but it says that it have a uefi bios and i want a uefi bios so i can do it safely?

So i found a deal on a gigabyte z68x-ud3-b3, but i saw that gigabyte on their website didn't mention what pcie x16 gen is this motherboard, also if it is pcie gen 2 is there a difference between the gen 2 and the gen 3 with a card like rx 580

I got this case used cooler master sileo 500, i heard that will overheat the gpu and i have a gpu that heats it is xfx rx 580 so what should i do will increasing the fans and undervolting help?

i got seasonic s12ii 620w and a case called cooler master sileo 500 for 56$ Im building a used build with 3th or 4th generation, with an rx 580 8g the seller tested the powersupply and the 12v , 5v , 3.3v rails was fine, also he tested it with an rx 570 on furmurk for 10 minutes and there was...

So i was exploring old motherboards and i saw that there is a motherboard like the p67 or G41 , and i wanted to know why intel stopped making those chipsets The P and the G varients And the h varient was like a mid range motherboard like the h77 but they are now a Low end motherboards like the h310

So i have Ryzen 7 3700x with liquid cooler thermaltake 360 3.0 argb sync edition so in aida64 without the fpu test on load the temps are 70 , 72 like that With the fpu it reaches 95 and 94 So is that normal or should i do something change thermal paste to good one like arctic mx-4 , also im...

So i have bought This case : Xpg battlecruiser And this aio : Thermaltake 360 3.0 Argb sync edition So it seems like the aio doesn't fit in the case so i removed the rear fan is that okay ? Note : The case manufacture says that this case supports 360 in the top and front of the case

So i have got alot of rgb cables and fans cables and i don't know which one to install in the motherboard any help my specs are Cpu : ryzen 7 3700x Motherboard : X570 Asrock phantom 4 gaming Ram : 16 gb (2x8) Crucial Ballistics 3000 mhz Water cooler : Thermaltake 360 3.0 argb Power supply ...

So i found two deals in my country X79 mb + Xeon e5 1650, and a i7 3770 + Z77 mb The x79 is 20$ more than the lga 1155 one so is it worth it to get the x79, and another question can i run the xeon e5 1650 with the intel stock cooler or it doesn't have a stock cooler with it because i don't want...

So i have got too options for my build all are used i3 9100f,h310,8gb cl12 2666 i7 2600k,thermaltake nic c4(better than 212 evo),z77 and i already have the ram The i3 build would be 25$ more, i have done some researches and i can overclock this 2600k to 4.7 ghz with this cooler which i found...

So i want to build a system i was gonna buy i7 3770,z77,8gb ram And i found there is a deal with h310,i3 9100f,8gb ram with the same price (+10$) my main purpose is gaming, So what are your suggestion which i should go with and why?

So i found very good deals for x58 i can get xeon x5675 + asus p6t + thermaltake nic c4 for 100$ and i have another choice of getting i7 3770 + z77 for 132$ So which i should get and is this cooler capable for overclocking xeon x5675 because if i get x58 of course i would overclock it to 4.5...

So i have a gigabyte z77-d3h,rx 580 4g, 8g of ram so i need to get a processor for this build i have got 2 choices here : 1st one : getting an i7 2600k and a cooler called Thermaltake NiC C4 both for 101$ 2nd one : getting i7 3770 for 94$ so both are similar in price i saw a benchmark that...

so i already have a z77 board and i need to choose between these processors : xeon e3 1230 v2 and i7 2600 they are at the same price in my country but the xeon is more rare so it will be hard to find a used shop that sells it but the i7 2600 is everywhere so which one should i get?

So i was looking for xeon e3 1240 v2 and i found an asus p8z68-v lx but when i looked on cpu support list i didn't see this xeon cpu listed so will it work i understand that it needs bios update to work with 3rd gen

so i have got a xeon e3 1240 v2 i heard that i can get +400 mhz on any non k processor by changin Multiplier so i can get from 3.8 ghz to 4.2 ghz and what is the maximum safe bclk overclock that i can put also do i need to change anything like voltages ? thanks in advance edit : i have an asus...

so i was thinking about getting a 3rd gen build but i found there is good x58 deals in my area so which is better xeon x5670 4.5 ghz or i7 3770 stock and will a hyper 212 evo be enough to overclock it to 4.5 ghz thanks in advance

so i was wondering if a xeon e3 1240 v2 work on an asus p8z77-v lx but this cpu is not listed on the cpu support list but it use the same socket and there is other motherboards with the same chipset have it listed so will it work?

so i have a gtx 1050 gigabyte windforce edition i wanted to know if this settings is safe because this card takes from the pcie slot only +200 core clock +800 memory clock and if there is better settings than this that i can do please tell me

i wanted to know which processor is better in gaming xeon e3 1230 v2 or i5 3570 ?

i wanted to know which processor is better for gaming and can run more powerful gpus without bottlenecking it Xeon e3 1230 v2 or i5 3570?

i wanted to know if this motherboard supports overclocking : gigabyte GA-H77-D3H

so i was asking that if i can overclock the i5 2500k on a stock cooler on 4.5 ghz and stable i have a 500w psu btw

im gonna build my first pc Iam gonna build a ddr3 build cuz i can't afford a ddr4 one i will buy the cougar mx 330 case and asus h61M-LE R2.0 motherboard i wanted to know if the cables of the case will get connected to the ddr3 motherboard cuz i have seen all that are making a build with this...

Hello my current specs are : cpu : intel pentium e6500 2.93 ghz duel core Ram : 8 gb ddr3 Gpu : gigabyte gtx 1050 2gb OC edition PSU : 240 watt one Note : i know the psu and the cpu preventing the gpu from getting maximum performance So im on budget so i need help (i have 80$ to upgrade pc)...

I bought a gtx 1050 September 3 it was working fine I connected it with a HDMI to vga convertor I played games on it yesterday everything was fine and today I accedently disconnected my vga from the convertor it was connected to my screen and GPU before I disconnected the vga from the convertor...

Now I have a very bad pc it is : Cpu : intel pentium duel core 2.93 Ghz Gpu : Ati Radeon HD 4550 PSU 240w Ram : 4gb it can run simple games like : Minecraft , Cs:Go , Paladins , and other games at low graphics I want to upgrade it to : Cpu : Intel 2 Quad Q9650 3.00 Ghz Gpu : Galax Nvidia GT...