Recent content by Afterdark3

Its a 450 watt antec unit. I replaced it.

Hello, I have a Dell Inspiron 620 desktop and I am trying to install my quadro 4000 graphics card in it, however, when I try to install the Nvidia software and restart, the computer on boot gets to the windows start splash screen and then once it loads the GFX driver the screen blanks. Only one...

I know this is an aging question that has been asked by many but trust me I’ve exhausted all my resources. I am running an Asus Z-170-e motherboard with a 6600, and I cannot for the life of me get the USB to work properly. I’ve tried installing from USB with the support disk inserted, I’ve tried...

Personally, I would just upgrade your graphics card. That I5 is a perfectly capable CPU to handle a 1070TI. You'll save more money that way. Sell the 1050 and just upgrade from there.

Limit your frames, or turn your graphics settings. You are probably pushing too many frames to your CPU. I would doubt that your HDD is causing such bad studdering. If anything, your load times would be bad. What % is your CPU idling at?

If you have a stock cooler on hand, try installing that to see what it results in. If that cools your CPU then that means you need a new AIO loop. Just because the pump is "running" doesn't mean its moving water. I've seen pumps where the impeller shears off the shaft or comes loose. Sounds like...

I would recommend saving up. Once you put together about $125 get the new Athlon 200GE and a corresponding motherboard. It will be far more worth your time than your near 10-year-old rig.

Yes, you will need a HDD and Battery. Just make sure to get an OSX install disk aswell, unless you have another mac that you can get a version off the app store.

Try turning your graphics settings up (Or set a framerate limit in-game). It may be counterintuitive, but your newer GPU may be pushing too many frames to your CPU. Attempt to load down your GPU, which in turn might help your CPU, as the rendering of the frames begins to be the bottleneck, not...

I have a Compaq ProLiant ML350 Gen1, and am attempting to install Windows Vista/7, and because this system runs on a SCSI raid array, windows need a device driver for the card that runs the raid array. Now, i have a driver installer from HP (compaq's sister company at the time) but i do not know...

I have a Compaq ProLiant ML350 Gen1, and am attempting to install Windows Vista/7, and because this system runs on a SCSI raid array, windows need a device driver for the card that runs the raid array. Now, i have a driver installer from HP (compaq's sister company at the time) but i do not know...

Hello all, I have acquired a Compaq ProLiant ML350G1, and its main storage system is a Raid 5 array running Via SCSI, on a Compaq Smart 5300 Raid/scsi card. Now, what i need to know is when I'm installing Windows Vista or windows 7, how to load a driver that allows the installer to recognize the...