Recent content by amasoun

This is amazing guys, I never thought something like this would defeat a community like Tom's. Thanks everyone who tried at least to help me.

is it this completed ?

Easeus shows it as a dynamic disk, wtf View: https://imgur.com/a/onFZx4Q

Its not the Drive, its the data mate. Data recovery from that image is next to impossible.

I have made an image of this lost partition on a separate drive with Partition Find and Mount, but data recovery is very very very slow. I can recover very imp data in future if needed, even if it might take ages. Now I an open to work with this drive

I wont lie, I was a little tipsy when I did this all. One of my HDD started making clicking noises, I backed up all its data on a USB drive and dumped bad drive. Then I noticed (sigh) these two drives of a good hdd were of very small size. So decided to merge them and backed up these two drive's...

It was reported OK before this accident. I keep checking drive health all the time. I have messed with Partition table or something of this drive because I merged two partition into one and because I formatted this new drive, it is working properly.

MiniTool Partition Wizard Home , a very old version which I have been using for long time. I Don't what it broke of the third partition. First two partitions which are now One, is (are) working fine. Partition find mount software found the partition but it can only let me mount it and copy data...

Disk 2 415 gb approx, in green. Partition find mount was able to find the partition and mount it. Data is copying very very slowly. Its impossible to recover any data actually.

View: https://imgur.com/a/oSxU2as

I have windows 10 and I merged to partitions on my secondary hard drive for space. First one was a Primary partition while second and third were logical I successfully (or not) merged first two partitions by deleting them both and merged into one primary partition. Third partition which is now...

CPU: i7 6700 non K MOBO: ASUS Z270F RAM: RIPJAW DDR4 3000MHZ GFX: ZOTAC 3070 AMP HOLO OS: WINDOWS 10 LATEST I only wanted my RAM to run at 3000mhz, so I selected xmp profile and boom goes the voltage of cpu at idle. I remains at 1.248v even when its idle in even in Power savings mode but cpu...

I have same problem. I have an 80+ gold psu, and kill a watt says my pc is taking only 120watts of power. Even if I turn off every other load on home inverter, led light still flicker in the whole house. These led light Dont flicker when pc is not powered on and more load is attached to inverter...

I have used sfc and there were no errors. But explorer crashes every now and then and the culprit is always msieftp.dll I have restored to Defaults in folder option just in case it matters. But it doesn't.

Again got this error. Faulting application name: Explorer.EXE, version: 6.1.7601.17514, time stamp: 0x4ce7a144 Faulting module name: msieftp.dll, version: 6.1.7601.17514, time stamp: 0x4ce7c806 Exception code: 0xc0000005 Fault offset: 0x0000000000018b90 Faulting process id: 0xfe0 Faulting...