Recent content by Anonymouselite5

What is your LLC settings? I'd install HWmonitor https://www.cpuid.com/softwares/hwmonitor.html and watch Core voltages under load and idle for Load line calibration. Also a single 120mm may not cut it for overclocking, had an i5 that hit 100deg.C at stock clocks ;) I'd go to say 240mm or 280mm...

Little bit toasty. Usually I like to keep it max 85 just as a rule of thumb. Technically 90 should be fine but if you had the system under a stress test load or played during a 40 degree C day you could shoot higher. Which is pretty high considering the max is 105deg.C. So for longevity sake I...

If you want to use an AIO on a GPU, you'll need a bracket you can buy for the GPU to mount your AIO. Like the Kraken G10 https://www.nzxt.com/products/kraken-g10-white You'll need to take the cooler off your existing card and replace it with this, you'll also need some small heatsinks for the...

Have you checked that the block is sitting snugly on there, also have a look for a thin sheet of plastic they sometimes put there as well. I'd also check that the pump is running, you can usually just feel around to see if you can feel the flow of liquid in the tubing or vibration in the...

What games? or is it just every game? Just things to check is: your window settings e.g. window borderless/fullscreen. Changes things sometimes. GPU clocks are stable and not jumping up and down etc. Motherboard PCI-e bus speed settings? Try older drivers? Overheat? If you can install MSI...

What's your resolution? Im not sure how much vram R6S takes up on very low, I can test that now. However in that screen shot if you click on the 2% you can change it between min/max/avg/actual. So right now it is on minimum. Also to note is that if you minimise out of the game your usage may...

Get that as well, but I've just put it to Gmod. Usually it happens for me when an add on has just finished downloading and gets processed or something. (enabled/installed?) If you can log HDD usage at those times, for me the HDD just goes full load for about a second. Sometimes it also just...

The 80+ ratings are ratings on how efficiently a PSU can deliver power. Not reliability. However usually the lower quality units are lower rated, so if you plan to keep it for a long time or put load on it. For peace of mind you're better off getting a better quality unit. Such as a higher end...

What kind of interference are you getting? I've had a few issues with Wattman overriding some of my OC settings, but most of the time it lets MSI AB do it's thing. Do you mean benchmarking isnt working? For benchmarking I usually use dedicated benches such as 3dmark, Uniengine and the such. In...

I would say not bad and would work if you're very budget limited. However if you wanted better quality for a little bit more, have a look at EVGA's G2 series or G3 The series are made by different manufacturers, and the latter series are much higher quality. ;)