Recent content by anotherfiz

So the question regarding Raid0 on the 680i has not been answered yet. How does this effect real world preformence? considering its sequential read/write speeds, i would imagine any type of data transfer would suffer from this. Is this a problem with NCQ on the motherboard conflicting with...

ASUS mobos cant read SPD timings, i am using sisoft sandra to do my bandwith testing.

Running 512 megs of Corsair pc3200LL XMS series memory. Matched pair. Timed at 2.0-2-2-6-4 on a p4c800 deluxe motherboard. Running beta bios 1008.04 and im only getting abour 4600mb/sec bandwith as opposed to the 5000 mb/sec bandwith i should be seeing, (and have seen previously in the 1007...

Yes its an AGP 8x card. I have noticed this change since i upped to the 1007-13 bios

Have a Asus P4C800 Mobo runing beta bios 1007-13, Noticed that in the nvidia drivers it says my card bus is AGP (Pci modE) when it used to be AGP 8x. Does this make a difference? WHow can i turn it back to AGP 8x =x

Thank you guys for your info, on a side not though, has anyone heard of any fixes asus has come up with for the problem iwth the p4c800 promise card?

I wanna buy a PCI IDE Raid card, because i have the Asus p4c800-deluxe mobo and there seems to be a hardware malfunction in the promise / northbridge controller cards, making the drives write extremely slowly. What is a good, FAST, raid controller carD? I was looking at a highpoint...

I got a p4c 3ghz 800fsb. Thing rnus at 38-40 idle and 45 Active, my boxed HSF only runs at 2400 RPM aswell though, the only difference between teh way i installed mine and the way you asid to have installed yours was the inclusion of the thermal paste. Lemme tell ya that stuff helps ALOT...

Rebooting randomly, the first thing that comes to my mind is a heat issue, you sure you have the HSF on the p4 set properly? I found installing it onto my P4C800 was a little difficult as it was a bit finiky. Out of the box i had no problems running my asus p4c800 board with a p4c 3ghz and 512...