Recent content by apsolpt

Seasonic Focus GX 750 and TM phantom spirit Evo. Yes and yes.

Yes. Also did a clean GPU drivers install just in case windows installed some generic drivers on first boot up. I also updated the chipset drivers.

I finally upgraded my setup from a 4770k to a ryzen 7500f, ddr5 6000mhz cl30. Kept the Rx 6800. Did a quick test in dead island 2, before I had 86fps and now I'm getting 140fps. Nice. In the menu the shader compilation is the problem, before, the shader countdown was super smooth and fast, now...

That's good to know. I even got paranoid, all my thoughts were did I get a used NVME ? But the package was sealed ? How the hell did it get it there so fast ? I'll be checking weekly. Thanks.

I had to do a few reinstalls of windows maybe 4 times because I was having some problems with the activation and some compatibility issues. After looking up on hwinfo there was already 690gb of total writes. Isn't windows 11 like 40-50gb ? On my old pc I was using an SSD with windows 10 for...

Hi all, so I bought a new monitor today, everything was working fine, when I went to plug my old one I noticed that my gtx 970 only had one hdmi port so I searched for another cable since I don't own a display port cable and I found a hdmi to dvi cable that I used to use on my old monitor. So I...

Since no one replied anymore, I'm just posting this to whoever have the same problem. After reading alot and many tries, the problem was in the cpu socket, somehow I bent (slightly) ONE pin even tough I was really careful, and that was enough to make all this mess. Grab a needle or tweezer, and...

Well I've checked the pins and they are all angled to one side so I assume that's normal. I've been fiddling with ram sticks and found out it doesn't want to work in dual channel. the layout on the motherboard is DDR3_1/DDR3_3/DDR3_2/DDR3_4 (closest to the cpu) DDR3_1 always works no matter...

Do you mean the cpu socket ? Just did that and it's the same as before. I have a gigabyte z97 g1 gaming and the debug code it shows is C0.

Hello everyone, The motherboard on my brother's pc died so he gave me his cpu a i7 4770k, I changed it and now when i turn on the pc, it just beeps until it turns off and then on again. I then installed mine again, Xeon e3 1231v3 and now that one doesn't work too. Same problem, keeps beeping...

This morning I opened the pc case, and what I did was, re-tighten the screws of the motherboard, removed the gpu and connect it again. Turned on the computer went to test with msi kombustor which was the one that made the loudest noise because of the high fps, to my surprise the noise was alot...

Anyone?

Hi, I'm having a hard time dealing with this buzzing in my ears, this never happened before I dont know if it's just a coincidence but it started happening after installing windows 10 which was a huge pita to install, I installed bf4, went to play and in the loadout screen I was hearing a quiet...