Recent content by ashishgnr4

Had uploaded the picture don't know why they are not showing up. Again re uploading from imgur. Hope it's showing this time ! The cables you mention, are the ones from the case right? They are used to power up, reset the PC and also display a led usually in the front/top of the case when...

Here's the image, one with graphics card inserted also. Some of the portion are not completely inserted into the slot just above that small voltage regulator or something and below that IC symbol. (CPU 4/8 pin connector) yes they are at the back The one with the cable things says ((PWR_LED...

Thnx. So here is the thing that is blocking my card. Will an expansion card riser help ?

I recently bought a GTX 950. While inserting it to my Motherboard, right portion of the card gets inserted completely while left portion is not inserted fully. Some cables i.e. Power Led sth like that which we use to turn on our comp is blocking it off. While at my first try, card did power on...

So while going through the sys config by board bios says UEFI. I am still unsure about bios update however.

I have to check whether my board is UEFI bios or Legacy one. Regarding, Are you able to update the bios? Do you mean like normal windows update ?

I currently have 450 W power supply will it be sufficient ?

I am buying GTX 960 2gb. Will it fit on my motherboard as well as will my board support it ? My board is Esonic H61FEL3. Thanks.

Hello, Can I run DDR3 2400mhz ram (Single 8 Gb) on my H61FEL mother board. I would like to install HX324C11T3K2/16 RAM. My motherboard says it can support upto DDR3 1600mhz. Thank you.