Recent content by BlazingAngels

I have an i9-12900KS. When I plug it into displayport on motherboard I get no display. Changing to IDG option in the bios activates the motherboard displayport. I now get a display with the motherboard displayport. If I have IDG multi monitor enabled, my main monitor is slaved to the GPU's...

I wanted to test my integrated graphics displayport. Can you configure the BIOS of the MSI Z690 Carbon mobo to use IDG while the GPU is installed. Will I able to use the motherboard ports?

It appears that I had fast startup enabled and the file was corrupted. Could that be the cause of this?

My monitor is a Acer XB271HU and it is disconnecting from the HDMI 2.1 port on my RTX 4080 after booting up computer after shutting down after Windows Update has prompted me to shutdown or restart. The splash screen displays then has the spin circle animation. Then it fades into a black screen...

I have checked the driver for my monitor and I do have the latest version. I have also tried a different monitor and this problem is not present. It was a generic Asus Monitor I found not sure what model.

My Acer XB283k backlight flashes during a display driver install when it is plugged in via HDMI 2.1. Not sure if this is normal behavior for this monitor. It happens on boot up as well when plugged in the Display Port but not with HDMI 2.1. Below is a video of this issue: View...

As well as MSI live update.

I am not. I am just saying if you flash your VBios only download it directly from the vendor. If there is a VBios update in dragon center or MSI live update that's another option.

I would not flash the VBios unless it comes directly from the vendor.

I did not know that. I'll keep that in mind. Not sure if that applies to VBios that are on the vendors site.

Thought there might be a performance gain or other fixes. The card works fine. Absolutely no issues.

I am not sure if the VBios rom that I linked for the RTX 4080 Gaming X Trio is legitimate or not. I am aware that I will need to back up the current rom with GPU-Z and or NVFlash and I have instructions to restore my previous VBios incase the VBios flash does not work properly. I am concerned...

No Problem.

Changing the boot mode from UEFI to CSM gets rid of the backlight flicker completely.

I installed a RTX 4080 Gaming X Trio into my system and for some reason when my PC boots the backlight of my monitor turns on and off once. Sometimes before the splash screen and sometimes after. I did not have this problem with my old card which was an RTX 3080 Ti Founders Edition. Not sure if...