Recent content by Brighttail

  1. Brighttail

    Where would be the firmware update for Samsung SM961 be located?

    Which is why I've been wondering where on Lenovo or things like Thinkpads.. where would it be?
  2. Brighttail

    Three Samsung SM961 received --> tested single, Dual Raid 0 & Triple Raid 0

    Some folks are saying that these numbers are impossible. They are saying that the saturation point is 3.5gbs. I have a 40 lane CPU and went back to my original setup with two 980s running at x16 each and two 961s in RAID 0 both at x4 each, this used up pretty much all 40 lanes. My numbers...
  3. Brighttail

    Three Samsung SM961 received --> tested single, Dual Raid 0 & Triple Raid 0

    Hey all, So I got three of the Samsung sm961 256GB M.2 drives today. I thought I would have some fun seeing what numbers I could come up with in single, Dual Raid 0 and Triple Raid 0 configurations. They are all on a PCI-e to M.2 card in a PCI-E lane all running at x4 speed on a Rampage...
  4. Brighttail

    Where would be the firmware update for Samsung SM961 be located?

    One would think that would be the case, however in the article it suggested that due to it being an OEM product, Samsung probably wouldn't release it there. In fact according to the website, there has NEVER been a firmware update to the SM951 or the 941 either. :(
  5. Brighttail

    Where would be the firmware update for Samsung SM961 be located?

    I just finished reading Tom's review on the SM961 for 256, 512 and 1TB editions. With this being an OEM drive, where would one look for an updated firmware for drives like these or the SM951? Just curious where to start looking or keeping an eye out. Thanks.
  6. Brighttail

    Water cooling questions about components.

    I'm currently running 2 copper Rads and a copper CPU block. I have been using Monsoon's barbs for soft tubing (which i think are silver plated) and Mayhem's pastel which contains its own Biocide. I've done this over a year with no problems of corrosion. My question is that I'm looking to get...
  7. Brighttail

    Asus Poseidon GTX 980 sluggish after win 10 update...

    Hey all, I have 2x Asus Poseidon gtx 980 GPUs. Since going to Win 10 my benchmarks seem sluggish. I was running the RealBench Image editor and what took 60 seconds to finish is now taking 120 seconds or more. In Cinebench i am used to getting 180+ FPS and that has dropped to 130ish FPS. I'm...
  8. Brighttail

    My finished build WOOT!

    OOps didn't update the M.2 . I moved up from the Xp 941 to the SM 951. 2200 Sequential writes!
  9. Brighttail

    My finished build WOOT!

    I'm using the ROG Swift as my main and a Asus VG248QE as secondary.
  10. Brighttail

    My finished build WOOT!

    Here are the final specs: Case: Phanteks Enthro Primo SE red/black MB: Asus x99 Rampage Extreme CPU: Intel i7-5930k GPU: 2x Asus Poseidon GTX 980 PSU: Corsair AX 1200i RAM: 4x4 Corsair Dominator Platinum DDR 4 2800Mhz BOOT M.2: Samsung SM951 m.2 256GB APP SSD: 2x Samsung 850 Pro 256GB...
  11. Brighttail

    Finally got the Samsung SM951 256GB M.2 SSD --- Faaaaaaast

    I just ordered a M2 brace to put the XP941 in my Asus G751 laptop. Can't wait to see how that little puppy runs with the XP941. The Samsung 951 is running perfectly and unbelievably fast. Most noticeable is the launch speed of many of the games and loading times between zones has reduced...
  12. Brighttail

    Finally got the Samsung SM951 256GB M.2 SSD --- Faaaaaaast

    Honestly the difference between the xp 941 and the sm951 can only be seen if you have a PCIe 3.0 x4 or M.2 3.0 x4 slot to use them in. If you have a 2.0 x4 or 2.0 x2 slot you aren't going to see much difference between the two.
  13. Brighttail

    M.2 x4 Gen-3 SSDs with 32Gb/s bandwidth

    Yes the XP941 was a bit of a bear at first to get recognized. Make sure you have latest BIOS and you may need to turn off CSM and change settings to Raid to get the drive to be recognized. The SM951 had no such issues. It was recognized and booted up perfectly. I agree also that you should...