Recent content by BrunoCzar

  1. B

    Question Computer freezing after motherboard replacement X99

    They asked me to send it back to China, but the shipping price is too high. I tried to risk anything, I changed the c-state on Bios from C6 (retention) to C0. It still hasn't crashed after 2 hours of idle use, I think that is something related to this.
  2. B

    Question Computer freezing after motherboard replacement X99

    Hi, I recently replaced my motherboard keeping all other components: cpu, memory, ssd... During regular use, the computer suddenly freeze. There is no blue screen, no error message, nothing on system log. Is not only the video screen, because numlock signal stop responding on the keyboard too...
  3. B

    Question Toshiba X300 4TB making jamming noises

    Hi, I think that my problem is similar to another thread but the last post there asks to not up the topic. I have a Toshiba x300 4TB as secondary unit, after some years of use, now is making very worrying noises, as if a fan suddenly stalled. After revisioning all coolers and fans, I...
  4. B

    [SOLVED] Quad channel memories

    Just some additional info. I also have this screen on setup where I put this "4 way" on Channel and Rank Interleaving to see if something changes, I changed back to auto, no changes perceived: That's the info that CPUz presents, when I change the slot I see the same value for Part number...
  5. B

    [SOLVED] Quad channel memories

    All 8 DIMMs are from the same model, Kllisre DDR3 8GB ECC server memory 1866MHz. The whole info didn't fit on the screen but it's exactly the same config of cpu 0 on cpu 1. Ch 2/3 Dimm 0/1. The manual indicate A1 B1 A2 B2 - C1 D1 C2 D2 but I'm using all 8 slots. The model is Jingsha X79 ATX...
  6. B

    [SOLVED] Quad channel memories

    Hi, I got an x79 motherboard from Jingsha about six months ago. It's working perfect with 2x E5 2650 v2 xeon processors. At first I reused 4x stick of corsair vengeance regular memory sticks. Yesterday I got 8x sticks of ecc DDR3 memories, I was anxious to see if it work with four channel...
  7. B

    Question Connect 2x 4-pin power (different sources) to one 8-pin EPS-12v

    Well, just to close to topic. I scraped the second adapter connectors with sandpaper and plug them in the motherboard. Each adapter was connect to an independent molex cable coming out from the PSU. I kept the system under test for over 30 minutes, I touch with my finger the most critical...
  8. B

    Question Possible Overheating or Failure With Power Supply

    I believe that the PSU was getting unstable getting close to the limit, it was a bad product. I would recommend corsair cx750 that usually is the cheaper one. I used a lot of them assembling mining rigs.
  9. B

    Question Connect 2x 4-pin power (different sources) to one 8-pin EPS-12v

    I know, they didn't get pretty but the guy make them in front of me, he welded every cable separated, this isolant tape is very good, more rubberized than the common ones. I'm willing to risk on the cable, I'm just afraid of the connector
  10. B

    Question Possible Overheating or Failure With Power Supply

    I was having this same problem playing Witcher 3 some years ago. I had a 700w Bronze PSU that should be more than enought to power my system at the time: I5 4690k Hyper 212x GTX 970 MSI z97 Gamming 16 DDR3 Corsair Vengeance Pro. I tested every monitoring tool that I could, HWMonitor, HW64...
  11. B

    Question Connect 2x 4-pin power (different sources) to one 8-pin EPS-12v

    Hi, Recently I acquired a dual slot motherboard, with two Xeon processors, it has 2x 8-pin slots for cpu power. I want to use on this set one 850w Seventeam PSU that currently has only one 8-pin connector. This configuration is for test only, I do have one 1200w EVGA Platinum, but I don't want...