Recent content by Calin Cristian

Hello all ! I was wondering how can I connect my thunderbolt 3 hdd's to my home computer. I am using the supermicro 4028GR-TR and I have to find a way to connect external drives with a very fast read/write speed. Now I am not sure what expansion card should I use exactly. I am willing also...

Thank you very much! I am appreciating your help! I will try booth cards and see what works best. :)

Hello! I am running on an ASUS z10pe-8ws mb with 48 core installed and all sata ports are busy with sata drives. What disk controller do you recommend so I can plug extra 8 individual drives?( not necessary for RAID usage) I found this as cheap option but I am open to other sugestions( Delock...

I found those components till now but is difficult with the adaptors : Quad connexion https://www.ekwb.com/shop/ek-fc-terminal-quad-semi-parallel VGA waterblock titan x https://www.ekwb.com/shop/ek-fc-titan-x-nickel-original-csq CPU block...

Water cooling advice request: urgent :( I have the following components to apply water cooling on: ************************** Asus z10 pe d8 ws ( water block excepting the RAM) ( 2 x E5 2680v3) 4 x TITAN X ( EVGA ) I am looking for soft tubes / 3 x pumps redundant for non stop operation without...

thank you Xibyth !!

Hello, Do you have any recommendation for a motherboard for E5 2680 V3 ??? It is pretty urgent matter to take a decision. Thank you in advance !

Hello all ! Which are the best "no noise" radiators and cases that suits the i7-5930K ? If possible to cancel noise at max. It is about the non fan radiator or about the pc case ? Also, any idea is the"no fan" cooling system is ok to use with the i7-5930k because I use this cpu for 3d...

Hello all ! Which are the best motherboards that suits the i7-5930K ? Are around 1000 € +/- for motherboard and ram memory. If you have any suggestions for memory that will fit that motherboard is great but I am not sure if I have to post on different topic. Also, any idea is the"no fan"...

Hello all ! I am working on some clouds in maya 3d. I need to see them in real time via GPU as close as possible as in the final CPU. I have a nvidia quadro k5000 on 2x quad xeon 2.26 E 5520 MAC . They say that can support this. Does anybody knows how to enable real time rendering , or what is...

Hello all !!! I want to build a system for 3D rendering (Maya 3d) I have at the moment a mac pro 2 x quad xeon nehalem 2.26. Nvidia quadro K 5000 32 Gb / 1066 Mhz I want to make a better and faster system in order to speed up my render time. I have about 3000 euro to buy at the start a...

thank you very much for the detail explication, Bambiboom. I already have the nvidia quadro k 5000 mac and pc versions. I decide also to sale my old mac pro so I can add 1500 extra to what i shave now, so I can spend 3500 euro for the cpu motherbaord and Ram. So according to what you say I can...

what is better/important for 3d rendering? number of core or the power of the core? if choice will be : E5-2680 V2 >> 2.8GHz 10 Core << and >> E5-2687W 3.1GHz 8 core do you have any suggestion for ECC memory that will fit this cpu ?

I see that some ram memory is up to 3000 Mhz , why is that since most of CPU's support up to 2000 ? does the 3d software has also to understand that speed or it will just work faster? is there any trick to make the Intel Xeon E5-2650 V2 2.6GHz 8-Core Processor work with more that 2000 Mhz ram ?