Recent content by caniba

Your temps are fine. Your OC looks good. Did it pass prime? I have the same setup at 3.8.

I doubt it is the cpu, unless there is a bent pin or something. Your mb will need to be tested with different ram or your ram tested with a different mb.

frrd70 - 1) the manufacturer should be correct before a vendor. 2) This Gskill is very good Also the Corsair you linked is very good. Unless you intend to OC the 1333 will be just fine. jokeboy, That is a strange issue. The board should underclock the ram to a slower speed automatically and...

I don't know how many amps. It uses 95watts. Read this to do your calculation The problem with your current psu is it only has 32 amps on the 12 volt rail and the 4870 recommended power supply minimum for the 4870 is 32 amps on the 12v rail. It will work on your current psu but it will be...

Your psu is cutting it close with only 32 amps on the 12v. Don't get the rosewill. This corsair is much better and is more than enough for your setup with 52amps on the 12v. Corsair 650.

For your MB the ram must be ddr not ddr2. Here are 2 good options. Gskill OCZ

Antec 300

Unless you upgrade to i7 ddr3 is not worth it. Don't get more than 4gb unless your OS is 64bit. Also unless you do a lot of photoshop or similar you will see no speed gain going from 4 to 6gb. these are good options in the UK. ocz corsair

google is your friend.

This would be a good option. If you really need a new mb, get the gigabyte ep45-ud3r. With this ram and mb running the e8500 you could oc it to 3.8 easily. What OS are you running?

see if you can find the corsair 450.