Recent content by charpour

  1. C

    [SOLVED] AIO liquid temprature - is it normal?

    Thanks @Phaaze88 , appreciate your response. In fact, I removed the dust filter from top exhaust and this alone further decresed water temp by 1-2 C. I really wanted to move to full custom cooling, however I'm a bit reluctunt to waterblock my GPU, as I haven't done it before (or water cooling)...
  2. C

    [SOLVED] AIO liquid temprature - is it normal?

    Hi all, I'm running a 5950x CPU cooled with a 2 year old NZXT x62 (280mm with 140mm fans). Let me list PC specs: Case: Lian Li O11 Dynamic XL CPU: 5950x Cooler: NZXT x62 (280mm with 140mm fans) GPU: Red Devil 6900 XT Fan setup: 3x bottom and 3x side QL 120 intake running at 1000 rpm, 1 QL 120...
  3. C

    [SOLVED] SSD's estimated remaining life dropping rapidly

    Warranty is for 5 years and I'm currently less than 2 months in it (that's why i got concerned about the remaining life figure being 95%)
  4. C

    [SOLVED] SSD's estimated remaining life dropping rapidly

    Thanks for all of the responses. It's still not clear to me, is it something to be concerned of? I do keep backups so I wouldn't worry much about the data, what worries me is the life expectancy of the drive. Cheers
  5. C

    [SOLVED] SSD's estimated remaining life dropping rapidly

    Hi all, I currently own two Aorus NVME SSD drives: First one is the older Gigabyte Aorus SSD 2TB M.2 NVMe (5 GB/s, 4.4 GB/s) which I own for around 2years and I've used it as my primary drive until I I bought the new one. It's drive estimated remaining life is 99% as reported by the software...
  6. C

    [SOLVED] Managed to bend some pins while putting 3900x in it's plastic cover

    Thanks, got a razor blade, however it seems to be flexing thus not sure it'll do the job. I guess I'll try he mechanical pencil approach
  7. C

    [SOLVED] Managed to bend some pins while putting 3900x in it's plastic cover

    Stupidity kicked in while I was placing the CPU back in it's box, carelessly got it upside down and bent some pins while closing it up, can be seen in the screenshots below: I know it doesn't look awfully bad, can something go wrong while bending them back (haven't done that before)? Any...
  8. C

    Question Broken tiny pieces -- dangerous?

    Sure here it is from the front: View: https://i.imgur.com/0bLyUnr.png
  9. C

    Question Broken tiny pieces -- dangerous?

    Hi all, While installing the DDR4 memory, it seems that somehow I managed to break two tiny pin-like pieces on the memory slot (G.SKILL Trident Z), you can see the image here (red circles highlighting 4 of those, this is not the module with the broken ones shown here): View...
  10. C

    Question New AMD build, problem with CPU?

    Hi, thanks for your reply. I've updated the BIOS very recently (2 days ago). With regard to idle tempratures, it depends. Most if the time it's between 37 - 46 C (I guess windows spawns background tasks that cause temp to go up a little?). Some people suggested that having the fans installed...
  11. C

    Question New AMD build, problem with CPU?

    My first post here so hello to everyone! After several years I decided to build a new PC (all AMD) and I finished it couple of days ago, however I've been having some problems (?) with the CPU. Hardware is the following: CPU: AMD Ryzen 9 3900x Mobo: Gigabyte aorus master x570 RAM: G.Skill...