Recent content by chassmith

Awww it’s ugly ?? At 2,300 I can and would build one myself. However a 3.5 that’s fare. My college pc cost me 2,600 soo ?? not one to talk

Would love to see jay’s two cents ??

windows 10 + infinity fabric means you ARE eating ram whats that usage like in task manager i wonder ? also play with settings to max the ram amout you got avala but god yes get more then 8

the 5.1 setting should be the magic to it... maybe a setting in the amp to send the signal for sub but i \?_?/

hummm I dont think you need the speaker channel hooked on the sub. that would be to pair off the speakers from the sub itself.... what are the 2 ports on the sub ? should only need one... I have a feeling the 2 out on the amp used to be combined into ONE input to the sub. so left right rca...

using onboard graphics ? try with out the gpu

the input from pc goes to left and right audio input's I suppose you could set the audio out on pc and hook in to the sub input but i dont think it will work. the amp should take a left and right audio sorce and mix it to 5.1 with sub center and all the jazz.

hook it to the left and right inputs not to sub in ... then set the amp to 5.1 it sound pump out the sub

it is 100% the uefi that is messing it all up boot legacy and your golden pony boy a guy TRYING to get a 6000 to work on UEFI https://www.overclock.net/forum/67-amd/1474306-radeon-6000-series-uefi-bios-thread.html and reddit about it a bit...

looks like the sub could hook from amp SUB out to the line in on sub woofer.

run the pc to the amp use a rca split headphone to left right hook to left right in on that nice looking amp >> run speakers and sub off the amp.... if needed strip the rca head off and hook the wire for the speaker into it...

ish and kind of lets walk this back you have 2 good speakers as in NOT desktop we are talking floor standing ? you have a subwoofer << from unknown >> so where and what type is it ? if the sub is from a old 5.1 then IT needs to run the other speakers as IT is the amp usually 5.1 use the...

hummmmm been a long time since I used optical audio *as a side note it is no better unless you have like a 20k system but i digress To select the audio format(s), select (Settings) > [Sound and Screen] > [Audio Output Settings] > [Primary Output Port] > [DIGITAL OUT (OPTICAL)] cheek that...

You need something to amp that sound Most subs run the speakers as the lone out port is not powered. Basically You got speakers grate they do not need an amp per say but the sub dose. Ether get a 3.1 set up from the shop, or run the signal to a amplifier/processer

PS4 optical out set in setting ? HDMI dose sound and video So maybe the ps4 is thinking for you