Recent content by Computermaster04

Alright, thanks. I am actually planning that nowm

It's version is 3202. It starts with rated clock,2133 but there is no way I can enable DOCP. I found it but there is no option for enabling DOCP. Only disable option. Haha.if I use 2 sticks only, it goes to its original clock, 2666 mhz.

Alright, so I tried just changing the Dram voltage but it just revert to 1.2V.

Oh so the rev is version. I did an update yesterday but no luck. So what you are sayin is to raise the dram voltage first? Then save and exit. After that, change it to 2666?

How do I know what rev is it? I tried changing via AI tweaker only. and there is no DOCP option in mobo. Actually if I install 3 rams, it will read as 2666 mhz. But when I put the last ram, it will beep 3x and wonr boot. So I tried resetting the cmos, but didnt work. When I changed the ram to...

Hello guys. I recently purchased new rams, ddr4 2666(4gb x 4 ). My motherboard always resets it to 2133mhz even though I choose 2666 in the OC section of the BIOS. I also changed the Dram Voltage to 1.3000V but it always resets that to to 1.2V. I am wondering what is the cause of this problem...

I just solved the problem by changing cloning program, aoemi basic. Thank you guys.

Creating a disk image can erase all the data from that external drive right?

I used minitool partition wizard and yes, disk to disk. . Do you mind if I ask how to clone it to disk image first? I am not sure how to do that. And what program do you suggest? Thank you.

Hello guys. Recently, I cloned my OS from an old ssd(120GB) to a new one(240 GB). The OS with some other files is about 35GB in capacity. After Cloning, I noticed the new SSD took around 100GB capacity. I dont understand. I was thinking it must be the recovery files, but cant find any recovery...