Recent content by conrad357

i'm in the same boat with 6400 ram and can't get it to run at full potential, so then just do 333 or 1333 fsb and manually set ram to 667 and tighten timings?

well i tried taking the multiplier down to 8 and raising the fsb to 400 which is actually 1600 and bumped what i needed to to get it stable, but it wasn't steady, just lagged and locked up eventually. so i can keep it at 9x multiplier, then 1333 or 333 fsb and what would i set my memory to...

that explains it badass! thanks i know for a fact that my BIOS doesn't have a "System Memory Multiplier" when i have the fsb at 1066 and linked it shows my memory at 800mhz in the BIOS. Then when i have the fsb at 1066 with manual it still shows the memory at 800mhz in the BIOS. But for...

thanks for the reply alpine. ok, well I just started again from the beginning and i got the fsb to 1066 and didn't up the voltage at all and it's running steady. I went up 1 bump on the NB and 1 on the SB for stability and my ram is at 2.0v with the "Linked" setting running at 400mhz a piece...

I've read tons of posts on forums, but most just give FSB speeds, not actual numbers to use in setting the system clock, so how do we know what to use actually? When do you use the 1:1 ratio? or any of the others if your motherboard BIOS doesn't let you manually set your memory multiplier? I...