I've read tons of posts on forums, but most just give FSB speeds, not actual numbers to use in setting the system clock, so how do we know what to use actually?
When do you use the 1:1 ratio? or any of the others if your motherboard BIOS doesn't let you manually set your memory multiplier?
I have the updated BIOS from MSI LiveUpdater and Web
I've Disabled the following in BIOS
Execute Bit Disable
Set Limit CPUID MaxVal to 3
HPET
CPU Smart FAN Target
D.O.T. Control
Intel EIST
All Spread Spectrum including:
CPU Spread Spectrum
PCIE Spread Spectrum
CPU/LDT Spread Spectrum
SATA Spread Spectrum
__________________________________________________ ________
Questions
System Clock-Auto
Linked
Manual
Which is best and when to use for what?
I went to 1333 for a steady 3.0ghz overclock. Temps were below 40C
at idle and were 65C under full load.
__________________________________________________ ________
Adjust CPU Ratio-To what?
Stock shows 9, but can go from 6-9 as well.
Last night I got to FSB1600
Mem 800
with 8x multiplier
very fast, but lost settings on re-boot. So basically unstable.
__________________________________________________ _________
CPU Voltage-Try to not increase this by first overclocking as much as I
can on stock voltage, but if it becomes unstable or won't boot, I just increase it how I see fit based on stability right? I just want a good bootable computer to use daily for about 3 hours and 48hrs on weekends.
Not too much into games yet, but will once I get speakers and a better monitor. Mostly business/student needs.
__________________________________________________ _________
Memory Voltage-Stock is: Timing 5-5-5-15
Voltage 1.8 - 2.0
I got this to 2.2 and everything was fine.
I can manually set it to 4-4-4-12 1T as well.
NB Voltage-I got this as high as I could and it worked great, I think it was 1.7.I heard on forums that the higher you go the better for overclocking. Plus it's got a fan on it stock and I don't care about noise fan at all.
SB Voltage-I got this to 1.6 and it was fine too. But it's not cooled so how much is too much?
FSB VTT Voltage-I read that if you go to 20% it stabilizes your rig when
you overclock, so I set it and it worked great.
My Setup
Intel Core 2 Duo E4300 Allendale 1.8GHz
ZALMAN CNPS9500 LED 92mm 2 Ball Cooling Fan with Heatsink
Arctic Silver 5 Thermal Compound
MSI P6N SLI Platinum 650i
G.SKILL 2GB (2 x 1GB) DDR2 800 (PC2 6400) Dual Channel
COOLER MASTER Centurion 5 CAC-T05 Case
Thermaltake TR2 ATX 430W
EVGA GeForce 8600GT 256MB GDDR3 PCI Express x16 Video Card
Western Digital Caviar SE 160GB 7200 RPM SATA 3.0Gb
$700 exactly with shipping from NEWEGG
PURE BUDGET BUILD
When do you use the 1:1 ratio? or any of the others if your motherboard BIOS doesn't let you manually set your memory multiplier?
I have the updated BIOS from MSI LiveUpdater and Web
I've Disabled the following in BIOS
Execute Bit Disable
Set Limit CPUID MaxVal to 3
HPET
CPU Smart FAN Target
D.O.T. Control
Intel EIST
All Spread Spectrum including:
CPU Spread Spectrum
PCIE Spread Spectrum
CPU/LDT Spread Spectrum
SATA Spread Spectrum
__________________________________________________ ________
Questions
System Clock-Auto
Linked
Manual
Which is best and when to use for what?
I went to 1333 for a steady 3.0ghz overclock. Temps were below 40C
at idle and were 65C under full load.
__________________________________________________ ________
Adjust CPU Ratio-To what?
Stock shows 9, but can go from 6-9 as well.
Last night I got to FSB1600
Mem 800
with 8x multiplier
very fast, but lost settings on re-boot. So basically unstable.
__________________________________________________ _________
CPU Voltage-Try to not increase this by first overclocking as much as I
can on stock voltage, but if it becomes unstable or won't boot, I just increase it how I see fit based on stability right? I just want a good bootable computer to use daily for about 3 hours and 48hrs on weekends.
Not too much into games yet, but will once I get speakers and a better monitor. Mostly business/student needs.
__________________________________________________ _________
Memory Voltage-Stock is: Timing 5-5-5-15
Voltage 1.8 - 2.0
I got this to 2.2 and everything was fine.
I can manually set it to 4-4-4-12 1T as well.
NB Voltage-I got this as high as I could and it worked great, I think it was 1.7.I heard on forums that the higher you go the better for overclocking. Plus it's got a fan on it stock and I don't care about noise fan at all.
SB Voltage-I got this to 1.6 and it was fine too. But it's not cooled so how much is too much?
FSB VTT Voltage-I read that if you go to 20% it stabilizes your rig when
you overclock, so I set it and it worked great.
My Setup
Intel Core 2 Duo E4300 Allendale 1.8GHz
ZALMAN CNPS9500 LED 92mm 2 Ball Cooling Fan with Heatsink
Arctic Silver 5 Thermal Compound
MSI P6N SLI Platinum 650i
G.SKILL 2GB (2 x 1GB) DDR2 800 (PC2 6400) Dual Channel
COOLER MASTER Centurion 5 CAC-T05 Case
Thermaltake TR2 ATX 430W
EVGA GeForce 8600GT 256MB GDDR3 PCI Express x16 Video Card
Western Digital Caviar SE 160GB 7200 RPM SATA 3.0Gb
$700 exactly with shipping from NEWEGG
PURE BUDGET BUILD