Recent content by CpuBurner

  1. C

    Question Wondering if my PSU is reliable enough for a gpu upgrade.

    Alrighty, I'll search a bit more myself and decide. Thanks for all the help again! Have a good one!
  2. C

    Question Wondering if my PSU is reliable enough for a gpu upgrade.

    Yeah, that's the site i used to search for the others lol. I'm swaying more towards the be quiet! one, however according to the tierlist for this unit i should take the following into consideration: [13] Be aware that strictly multi-rail units (without a possibility to switch to single-rail...
  3. C

    Question Wondering if my PSU is reliable enough for a gpu upgrade.

    I live in greece and buy from local stores. The coolermaster psu is at 80€ and the seasonic one at 122€ so they are both quite budget friendly I think. My budget would be at around 80 - 150€ I guess.
  4. C

    Question Wondering if my PSU is reliable enough for a gpu upgrade.

    I see.. I bought my unit the summer of 2022 along with the other parts (except for the gpu) but I guess it makes no difference if it's not a "revision" of sorts.. If I am to replace it, I guess I would go with either the CoolerMaster MWE 750 Bronze 230V v2 as a more budget option or a Seasonic...
  5. C

    Question Wondering if my PSU is reliable enough for a gpu upgrade.

    Greetings, I was planning on upgrading my graphics card but i wanted to make sure that my PSU could haldle it. Here are my current specs on PcPartPicker: https://pcpartpicker.com/list/j424h3 , quick summary: Ryzen 5 5600x, 16gb 3600mhz ram, 1tb NVMe M.2, GTX 1050 (yes the non Ti 2gb version...
  6. C

    Question Analog. Signal out of range. 74.5 kHz / 60 Hz.

    Sorry for the lack of info 😅😅, my bad. I'm using windows 7 and I currently have just the tv screen connected, no other monitors or anything like that. The TV did work with the 1050, I was using it as a secondary monitor last year but never as a primary. Now as for the 9500gt I wasn't sure if it...
  7. C

    Question Analog. Signal out of range. 74.5 kHz / 60 Hz.

    Thanks for your reply! It looks like the output on my gpu is a DVI-I based on the pictures on the article that you sent. The adapter I have resembles the DVI-D more than anything. Since DVI-I "supports" both analog and digital DVI shouldn't it work? Geniunely asking because I didn't know about...
  8. C

    Question Analog. Signal out of range. 74.5 kHz / 60 Hz.

    Hey there, sorry for returning so late. I plugged in a tv screen because I don't have another monitor to try, now it only says "no signal". The system does boot into windows because I connected a pair of speakers just to have another point of reference and I heard it load into windows normally...
  9. C

    Question Analog. Signal out of range. 74.5 kHz / 60 Hz.

    Alright, thank you very much. I'll get back to you after I try that.
  10. C

    Question Analog. Signal out of range. 74.5 kHz / 60 Hz.

    It happens Right after the "starting windows" screen if I recall (I'm currently not home) but I am 99% sure that it does get past the bios screen. I'll get back to ya.
  11. C

    Question Analog. Signal out of range. 74.5 kHz / 60 Hz.

    I used both of these GPUs with one display (an LG monitor, don't remember the model rn though it is an old one). The monitor only has a VGA input so I used an adapter to connect it with the gtx1050, the 9500gt has a VGA output already. I didn't change anything regarding the monitor with either...
  12. C

    Question Analog. Signal out of range. 74.5 kHz / 60 Hz.

    Hi there. So I was trying to connect one of my older GPUs to a fairly old system ( Core 2 Q8300, Asus P5Q motherboard, 8gb DDR2 800mHz, and the GPU I'm trying to connect is an Nvidia 9500gt). I stupidly forgot to uninstall the drivers from the gtx1050 that I had installed previously (pls don't...
  13. C

    [SOLVED] Accidentally touched the underside of my cpu

    First off ignore my username 😂 (ironically that's the name I picked 5 years ago when I registered LOL). Just asking this as a precaution incase I damaged my cpu cause I don't feel safe installing it before I get an answer 😅😅. Ok, so I just got a Ryzen 5 5600x and when talking it out of its...
  14. C

    [SOLVED] Accidentally touched the underside of my cpu

    I know I probably should've done this from the start, but I thought better late than never so I took a couple pictures to share just in case. I'm being completely paranoid but (if the pictures are clear enough) I just want the opinion of someone who knows better than me 😅. Thanks a lot.
  15. C

    [SOLVED] Accidentally touched the underside of my cpu

    OH MY GOD I KNE- oh had me there for a sec heh 🥲. Thanks for your answer also!