Recent content by cr4ig

thanks think i will get some of that then and the tubes are vibrating so im guessing that the pump is working but i cant really hear any sounds over the fans.

i will have to and get some cooling paste i used the stock one from the cooler.and im sure i removed the plastic cover haha thanks.

Sorry for asking so many questions but this is really annoying how its not working the way i thought it would.

i have read through it and it is what i have done with the pump connector, i have connected it to the cpu fan header port and the fan to the chassis fan and its is on full power and is still saying i am at 53 degrees on the coursair fan controller and -60 on the speedfan and 13 on some other one...

its the corsair h60 CWCH60/RF

also is there anyway to have the pump going on full as it is quite quite and just the fans that slow down?

i will try it again and tell you how it gets on. in the mean time can you give me an accurate way to measure cpu temps because im getting very different results from what programs im using

i know. but i already tried that and it registered the pump as a fan and kept decreasing the voltage going to it depending on the temperature of the cpu. so i had to change it so it gets a constant 12v otherwise it can damage it.

I have just fitted the corsair h60 to my computer and been getting very wierd temps. Using the corsair link I get anywhere from 50 to 70 decrees c with speed fan I get 0 now but I was getting 20 to 37 decrees and with another program it was measuring just one of my cores and it got 17 decrees...

So I bought a corsair h60 for my computer and when I ordered it I forgot to check to see if it was compatible. I just looked and the box and it says it fits AM2/AM3 but not fm2 which is mine. I looked on other websites it says that it is comparable with fm2 I'm so confused will it work or not I...

It's a blue led strip. How am I ment to power them then ?is there anyway to get 12v out of my pc?

I'm having a problem with wiring up some leds first of all on the led strip I have it has a red wire and a half black half red wire? Second of all I have looked up usb cables and ports they emmit 12v and the leds are also 12v but when I cut the usb cable in half and exposed the black and red...

I dont know how are what to even look out for?

Right. I have had this problem for a bit now. My computer is conected to the internet and lets me connect using it. It will log me on to steam but wont let me see the store because of error code 105 and when i try to load up web pages i have ths same problem it seems to let me open up pages...

that seems to of worked thanks never even gave it a thought when installing everything