Recent content by Daggas

Now, I took your advice and removed the front panel off.. And im shocked.. The temps of the GPU dropped all the way to ~77°C... Does this mean that this case is bad or what? Thank you very much!

Thanks again. Yeah, I've been thinking of switching a PSU, but im not quite sure if that's what makes the GPU temperatures rise. The fan speeds ramp up and all, Core and memory clocks stay at it's full. (Not sure if this is any use) But what I've seen right now from a few latest benchmarks, is...

Thanks for the reply. The PSU is brand new. The motherboard is GA-A320M-H, also brand new. The case tho, it's a GTT RAPTOR F-12 I've done the whole Wattage calculation on this website a few times before even making this build: https://outervision.com/power-supply-calculator and it would always...

Hello. I just finished building my third PC and after a few benchmarks the GPU (XFX AMD Radeon™ RX 580) is getting pretty hot on load ~85°C . I've tried Cleaning the GPU entirely and re-applied the thermal paste, but it only dropped by 2-3°C. If there's nothing left to do, will installing two...

Finally figured it out... Turns out, that the RAM stick was faulty. Still, Thanks everyone for all the help and advice!

Hello everyone, I'm going to buy myself a Fan controller to power up my 4 PWM fans. My question is, am I going to be able to connect and control the voltage of these 3Pin fans with DEEPCOOL FH-10 Fan controller?

4Gb- Team Group DDR4 4GB 2666MHz CL19 1.2V 8Gb- G. Skill DDR4 8GB 2666Mhz CL19 1.2V

The thing is that the PC didn't quite work by using 8Gb chip alone. The display would say something like "check cable connection" But the 4Gb one would work perfectly. I'm starting to think that the chip is bad by itself, but not quite sure. So decided to ask people who most likely know more...

Hello, I encountered some error. The picture bellow says everything, all the software like CPU-Z and all benchmark softwares say that I am running 12GB RAM DDR4 system, but the task manager only sees 4?.. Here's the picure: https://ibb.co/qFcxtxb Please help :/ Thanks in advance.

One stick is from TEAM GROUP the other one is from G. SKILL. But they're both 2666freq. and DDR4. I have tried using just the undetected one and the monitor would say "CHECK CABLE CONNECTION"

Alright, so I built another PC. SPECS: CPU: AMD RYZEN 5 1600 MOTHERBOARD: AMD A320 RAM: DDR 4+8 GB RAM 2666freq. Problem is, task manager detects only 4gb of ram while cpu-Z and speccy detects all 12... Any help is much appreciated!

Thank you very much for the reply. Cheers!

I just ordered an SSD and found an SSD cable, but not sure if it'll do. On the cable it says "serial ATA 26AWG DERONXIN" My question, is it Sata 1, 2 or 3? Thank you in advance!

SuperPower QoRi 500W

Hi everyone So I just installed a new CPU and the monitor says no signal detected I've tried switching RAM slots, replacing the GPU, removing cmos battery but nothing worked. CPU and GPU fans seem to work as well as the USB ports but not the monitor. My rig: GPU- GTX 960 4GB CPU- i5 2400 2x RAM...