Recent content by dhal277

I tried it with two different PSUs besides the original EVGA one. I do not think it's a PSU issue.

Im on this version, the last one --->7A39v1M6(Beta version) CPU is working fine on other motherboard, both the R3 1200 and R5 5500. So then the Msi board is cooked? can I save it somehow?

Hi, I'm building a PC for my colleague, specs below: MSI A320M Gaming Pro Ryzen 5 5500 2 x 8Gb Kingston Savage 2800MHz EVGA Supernova 750W Gold I used a Ryzen 3 1200 to update the bios to the last beta version as it was stated on the support page, that was needed for the Ryzen 5 5500. It...

Gigabyte RTX 4060

I have this system for like a 1,5 week, it just keeps crashing total randomly. While gaming, browsing or the computer is in idle. For now I have replaced the psu, ssd, did a few memtests, prime95, occt stability tests, bios is the latest one, amd expo on/off, other gpu..... but the issue is not...

Motherboard has the last BIOS, it was working before with a ryzen 3 1200AF Right now I have no other board for this CPU, only b550

Motherboard: MSI A320M PRO-VH PLUS CPU: Ryzen 5 2400G RAM: Kingston Fury 8GB 3200MHz EZ DEBUG led stops at cpu, I took off the cooler to check it, but the cpu is not heating at all. I tried to use different ram sticks, result was the same can it be a contact issue with the am4 socket? or its...

Outside, there is an antistatic Bag below it and my foam pad.

What really bothers me, that the Leds are on, even the PCI slot has some LED lights but there are no debug Leds... So you think the board is dead?

Yep that was also done when I take out the cmos battery

Not really because there was no display. Or how do you mean manually?

As mentioned above, I didnot used this board since I upgraded to B550, before it was working perfectly fine. LEDS are on, but when I press the start button, Leds are turning off, fans are spinning but nothing happens at all. Last bios revision was 5204. thats what I tried so far 3 different...

I've got a second hand gpu, package looked ok I did not noticed any damage on the card. I tested the card on my mobo before I put all the stuff in to the pc case. After I tried to screw in the gpu bracket I realized that something doesnot looks good, gpu gave no signal to monitor View...

Thats my problem too :) the board looks fine but still no boot. Also tried it from my other pc, but result was the same. View: https://imgur.com/a/aHfJCHU + all ram kits what I have, Crucial ballistix, kingston hyperx, Goodram IRDM

View: https://imgur.com/a/KQVaDio View: https://imgur.com/a/FueyuSr View: https://imgur.com/a/wQbZJZl