On my current MSI motherboard I tried running the PC without a CPU cooler, since I wanted to see if everything works/ boots up before installing the cooler (wasn`t sure if the CPU might be the problem). After realising that the missing CPU cooler was causing my system to automatically turn off...
My RTX 3080 has 2 8-pin connectors and they are both connected to the GPU via one PCIE cable that splits into 2x 8-pin connectors on the GPUs end. I dont think I need to use 2 PCIE PSU cables, do I?
I wasnt sure if thats the case because I tried running the same configuration with an Asus Prime x570-Pro motherboard 2 weeks ago and the RAM also wasn`t listed in the motherboard QVL. I managed to boot into the bios/ get a display signal about once every 12 tries and thought the board was...
BTW I also checked and my motherboard is definitely seated correctly and all of the cables are most certainly plugged in correctly.
Yet I still don`t get a display signal and the green EZ debug LED labelled boot remains on even 20min after turning on the PC...
And the DRAM LED is also getting...
Ok, so I installed the CPU cooler now and as a result the PC doesnt turn off immediately afte 30s. Although it remains on I dont receive a display signal on my monitor.
I checked all of the connections, the monitor, the HDMI cable and plugged the HDMI cable into my GPU since I´m using a Ryzen...
Hello guys,
I just finished building my new PC and I can't get it to work properly. When I turn on the PSU and then press the power button the PC turns on, the RGB comes to life, the fans start spinning slowly. Some of the motherboard´s EZ debug LEDS turn on: The red CPU led turns on first for...