Recent content by ds3439

I need the two screws that tighten this case bracket, it is always loose and sometimes fall out. DSC02937 by David Sykes, on Flickr

Should i set my DNS server in my router or in Windows settings? What is the difference?

How does the small one attach? The large one just slides in.

I had 2 different types of dust filter in the front panel, the larger one fits one of the panel vents but i can't figure out what the small filter is for. Think i should have 2 of the larger filters for both ends of front panel. View: https://imgur.com/87xlLGE

It was three tiny screws that were not removed, i did the repasting but not sure what happened as i get a high pitched buzz and no picture at all through HDMI, think i will have to contact Sapphire about it. Maybe damaged motherboard?

I was getting 85 degrees while gaming so thought i'd take card apart to reapply thermal paste. There are no screws on the circuit board attached to the heatsink and i removed 2 screws from metal sideplate but that won't detach. It feels like the heatsink is glued to the board, does anyone have...

I couldn't get Headphones working using the Top panel and had to plug into back of motherboard, is there a cable i need to connect, so far i have found these unconnected cables - 12V input 416 HDD LED Multi colour LED strips (2 connectors) Don't think i need these cables but would like the...

updating the SATA controller and NVme controller seems to have brought the BIOS screen back, not sure how though.

I don't know if this is normal for monitors as i usually use a laptop, but the monitor skips the BIOS and goes straight to Windows after a black screen with 'Input not supported'. I am connecting the Monitor with HDMI directly to my GPU (Sapphire Radoen RX 590). The BIOS is accessible from my...

I need to fix this panel back on but not sure one the screws i need to use, the two in red boxes.

Turns out it would fit after all, installing windows now.

I have the Phantteks P300 case but the metal plate on the card is stopping the card and the plastic on side of case (blue circles in photo)

Motherboard - ASUS ROG Strix B450-E Gaming CPU Cooler - Be Quiet Dark Rock TF Case - Phanteks Eclipse P300 I took the cooler out and inserted the power cable, reapplied thermal paste and remounted cooler. Still very tight even on an ATX board, hardly enough space to reconnect the Fan header...

I had to take the Cooler off the motherboard which has exposed the CPU, will i need to reapply the thermal paste?

I installed the CPU and cooler and have put motherboard in case, but the CPU cooler is so large and can't get the ATX12V cable in (top left of motherboard).