Recent content by feckl3ss

It did. I got it fixed though! Thank you for your help again. It is nice to know that other people are willing to help me out.

I have loosened the cpu cooler and the dram led still lights up. Any thoughts on why that is?

Hey! Thank you for your help, I have finally got my pc working, however, suddenly DIMM 3 has stopped working. 1, 2, and 4 work with all four ram cards, but the second i try to fill DIMM 3, it goes back to dram. Is that something to do with the DIMM itself or the bios settings?

There is also a button located next to the dram led should I press it? And does it matter that the CPU led is turning off?

So am I gonna need anything new if I want to use my pc to its fullest capabilities? Also now the DRAM light is turning on again with the ram in slot 3

Yes. Any RAM stick in slot 3 with no other ram slots full allowed the boot device led to turn on and dram to turn of. However, the cpu light stayed off and there was no video output still.

EPU and TPU lights are always on, even when the pc is not powered on, then the CPU LED lights up for a brief moment, before shutting off and permanently lighting the DRAM light. Boot device led stays off throughout the entire process.

Upon rebooting CMOS, it is still not outputting video. Im pretty sure it isn't booting even, considering the boot device led is not lighting up. Assuming that this is instead a problem with even booting up, what would be my next steps?

I've been doing that for all tests. If the motherboard doesn't output the video card shouldn't either, right?

UDPATE: Upon removing all of the RAM and inserting a single stick into the third slot from the cpu, both the dram and cpu leds turn off and a new device boot led turns on, but still no output EDIT: it also does with with all four ram sticks, only in the one slot

I will try that again but if that doesnt work do you have any other ideas?

Yes there is a few. The dram led memok led is on, along with the epu and tpu switch lights, however I noticed that the cpu led turn on for a second then shut off. Could that mean anything?

As stated above, the lights on my fans, mobo, and GPU light up, but my monitors stay pitch black. I have tried both monitors with DVI and HDMI with both the GPU and mobo yet nothing works. I have tried reseating ram, CPU, GPU, and replugging the power cables. Something leads me to believe that...