Recent content by FluxCap

  1. F

    USB short, possible fried board

    Take the MB out and breadboard it to make sure it is not shorted.
  2. F

    1 long beep 2 short (sometimes)

    The gpu is at blame with an AWARD based BIOS. Reseat, try IGPU INSTEAD.
  3. F

    MSI z77a gd65 unable to boot into bios

    How did this happen? Were you flashing the BIOS? If not, how are you sure it is a bios problem? Attach a speaker and check for beep codes. Breadboard the build. Does it show a black screen? Please clarify.
  4. F

    [SOLVED] Critical Error: My bios is freezed!

    Your best bet would be to plug the drive into a different PC or use a USB to Sata adapter. Bios reset might help too.
  5. F

    Computer suddenly shuts off during boot (and other fun problems)

    Sounds like a BIOS problem, try resetting it first and if it doesn't work try flashing it over a USB stick. I had my Gigabyte H270 Gaming 3 do this infinitely and I had to RMA it because I couldn't even get it to boot.
  6. F

    Can i connect a normal 5m led strip directly to mobo 4 pin?

    I think that should work with a normal 12V RGB strip, you should still check the manual though.
  7. F

    Strange buzzing noise

    Or the PSU, they like to buzz. It must have been some ninja gang to rip a DVI cable in half :P Best of luck
  8. F

    Pc keeps freezing

    Sounds like you're using Win10, try a refresh.
  9. F

    PC won't start, PSU buzzing

    I'd still like to know how to test, and replace it.
  10. F

    PC won't start, PSU buzzing

    Do you think it could be a mobo (flux) capacitor? I have one in suspicion. It's just ~1mm above flat. I don't know how to test it though.
  11. F

    PC won't start, PSU buzzing

    I tried another PSU, so that would not help too much.
  12. F

    PC won't start, PSU buzzing

    I have an MSI K7N2 motherboard with an Athlon 3200+ XP. I have been running it in an old Cooler Master case and it has been OK for at least 10 years. About a year ago, it broke down, with something making a faint buzz in the machine. I tried replacing the 350W PSU with another, a 400 watt, in...