Recent content by freinstreet

Hello everyone! I have a kind of CPU cooler and I think it used to belong a server computer. Its model AVC A113000022 but a ASUS sticker was sealed in the middle of the fan. ( I think ASUS did some co-operations with AVC to manufacture good quality products as fan and copper blocks etc. ) Here...

And I forgot to say something that any cables come from any monitor has electricity because when I try to plug the DVI-D , HDMI or DipslayPort cables into the GPU's port , the edge of the cables accidentaly touches the GPU's I/O Shield and I always see a micro light between I/O shiled of the GPU...

I think the problem comes from GPU itself because I have decided to remove the VA1911A from the GPU and there is only screen GW2270H which is connected directly via HDMI cable and the screen has been worse than yesterday. There isnt any adaptors and the screen shows vertical rgb lines (...

Hi guys , I have dual monitors on Sapphire RX570 ITX 1244/1500mhz without overclock. My first monitor is BenQ GW2270H 19201080 60hz ( connected via HDMI cable ) and the second monitor is ViewSonic VA1911A 1366768 60hz ( connected via VGA cable on VGA to DisplayPort active adapter ) The issue...

Last Update : I affixed my new stick of RAM that has CL16-18-18-38 latency values on my mobo. I increased the mhz 2133 to 3000 without choosing D.O.C.P. option ( I set the values manually ). The ram that I already have has CL15-16-16-35 and does not work with its CL16-18-18-38 friend. I set...

Update : I saw the comment on foreign hardware forum about CL15 and CL16 Gskill RipjawsV DDR4 3000MHZ 8GB sticks that points the problem out as "the user's pc crashes and gives blue screen after he set both CL15 and CL16 sticks up together at 3000mhz on B350 chipset.

Thank you for your answer. I am really excited about it. I am having military service for 5 months. I will come back at the finish of August and I will try to figure out the sticks of ram ( Gskill RipjawsV 3000mhz ddr4 8gb CL15 and CL16) and I actually wonder about timings of the rams when I...

Hello everyone , I have been searching the right information about the working Gskill Ripjaws 8gb DDR4 3000mhz rams have same model , same mhz , same gb but different CL timings together. But I cannot find certain comments about this issue. I have Gskill Ripjaws 8gb DDR4 3000mhz CL15-16-16-35...

I did as you said , thanks again

https://ibb.co/kWePKq I have just downloaded the HWInfo and I got actual values of the mobo. Thanks a lot darkbreeze.

Hi everyone , I've got B350 chipset Asus B350M-K mobo and it has 2 male 4 pin fan headers. One for CPU fan (pwm) and the other one for chassis fan (pwm) but when I launch the CPUID HWMonitor , I see three values under the title of "Fans PWM" of the mobo. These values are ; FANPWM0, FANPWM1 and...