Recent content by GabrielKnight01

this is a board from a vacuum cleaner it has a pulsing output to the motor that's going from high to low so the motor is going from low rpm to high rpm and turning the pot in the off position does not turn it off, I forgot to write down which side of the pot is being used for off so I have...

Hi Kiwi I sent you a private message about if you still have a problem

I have an Asus H97-Pro motherboard with an i7 4790k at stock settings, when I disconnect the power from the power supply and wait a couple of minutes the Bios settings are reset. I have the latest Bios version 2906, I've tried re-seating the CMOS chip but no good, I've unsoldered the battery...

I'm wanting to install an M.2 NVME SSD in a PCIE adapter with a Samsung 980 pro 500gb or similar in my Asus Rampage 4 formula this motherboard does not have an M.2 slot on it, I don't think it has the latest Bios but I can install the latest if needed, is my board compatible and if not is there...

I have an NBN Huawei and a DSL Asus wifi router that I need mobile data to be used routed as wifi by a hot spot I looked at some youtube videos but both routers I could not find the settings for in the routers main menu. Huawei HG659 Asus DSL N55U Can either the above be used with a hot spot...

I have moved into a new house so im going around and testing the outlets with an outlet tester, I decided to use my multi meter on an extension cord I have, im in Australia I have 240 volts with to hot wires and an earth, my extension cord is giving a weird reading, on one hot wire with the...