Recent content by GotFragz

  1. GotFragz

    [SOLVED] Liquid Cooling Temps

    @Paperdoc, as stated I originally had the bottom fans on the rad pushing air through, so fans under the rad and the 3 fans on top pushing out, the gfx card fans are facing down so it I changed all fans to pushing out, whichever way I have them, it's had no change in temps in this case, the only...
  2. GotFragz

    [SOLVED] Liquid Cooling Temps

    Here is the setup View: https://i.imgur.com/8mthkvg.jpg , so at present you would say it's fine until I find a better case?
  3. GotFragz

    [SOLVED] Liquid Cooling Temps

    Hi punkncat, I originally had it that way the 3 vadar fans on rad at bottom pulling air in, the gfx fans are pointing though and the 3 lian fans blowing out the top but it didn't have bearing on the temps, the room is generally a warm room as it's only about 6m x 6m, window is always open in the...
  4. GotFragz

    [SOLVED] Liquid cooling fizzy bubbles

    I had these on 2 systems built just after Xmas, they went within 48 hours which required a small top up.
  5. GotFragz

    [SOLVED] Liquid Cooling Temps

    Thanks for the reply MeanMachine41, using spec you idle shows between 35-45, gaming pushes it to 75-80ish both temps fluctuate, but by the looks it seems fine, the glass on the case just feel very warm. I might get a better case at a later date.
  6. GotFragz

    Question Freshly built pc cpu issue.

    When you say no malware, what are you scanning with?
  7. GotFragz

    [SOLVED] Liquid Cooling Temps

    Hi All, Here’s my liquid cooling system PC HARDWARE LIST MOTHERBOARD - MSI MEG Z490 Unify (Socket LGA 1200) DDR4 ATX Motherboard CPU - Intel Core i9-10900K Avengers Edition 3.7GHz (Comet Lake) Socket LGA1200 Processo RAM - Corsair Vengeance RGB Pro 32GB (2x16GB) DDR4 PC4-24000C15 3000MHz Dual...
  8. GotFragz

    [SOLVED] Liquid cooling installation fail

    Glad you found the answer.