Recent content by guerru

Thanks for the quick reply, never updated the BIOS, the version is 1302, should I update it?. I've always been a bit reluctant to do so in case I mess up, I'm not an expert. I'll change the battery if it happens again. In regard of the OC, before it was running at 1.35 V, since I cleared the...

Hi, I ran into an issue with my PC recently and I don't know why, I'll post my specs before further explanation in case that might help: Motherboard: Asus prime z390a CPU: i5 9600K GPU: RTX 4070 PSU: Corsair TX650M RAM: G.Skill FlareX DDR4 2400 PC4-19200 16GB 2x8GB CL15 I built myself this PC...

ok, thank you for the help

I set manually the clock to 4800 mghz and vcore 1.3v, and a couple benchmarks in cinebench seemed fine, but prime95 after a couple minutes went down to 3800 mghz. should i be worried??

what do you mean by settings? the default bios settings? the psu is a 3 year old 650w corsair, i dont think that is because i had it on another build with no problems before, but how can I discard a psu error? could be a motherboard issue? also i have drivers updated thanks for reply UPDATE...

9600k on an asus prime z390-a motherboard. when benchmarking or running games, whatever heavy load task is, the cpu does not get past 3.8 ghz and vcore 0.965 the thing is in bios everything is on auto, this is turbo boost enable too. changing cpu ratio to sync all cores and vcore adaptative...

I quess it was a faulty CPU, I did rma to it and i got the replacement today, and Im not getting errors so far. Thank you all for the replies :)

Yes, that was the first thing I did.

yes, i did.

I ran memtest 4 passes and no errors were found.

could it be a faulty CPU? CPU-Z says its kaby lake instead of Coffe lake and Vcore fluctuates between 0.6 and 0.9, I guess thats low.

I did try to reset them, change places, and even running with only one stick at a time and replace it. In the motherboard they are placed in the correct slots and i have XMP disable. Either way they are running at the manufacturer specs with XMP or without it.

Hello, I recently built a new PC based on Z390 chipset but I carried over some components of an older Ryzen setup like the RAM, GPU and PSU. The other components are new, and this old ones were performing nice on the other build. I know there's no such thing like Intel RAM or AMD RAM, but I...

after 30 min of stress test the CPU temp did not go past 42ºC

on load too, I dont know if i checked that within a long period of stress, im going to check that, but i think it was fine.