Recent content by harryswartz

Swapped slots and appears to be working error free. Seems the module with the higher latency should be in slot 1. Thanks for all your suggestions.

Hi, Yes. I updated my post. Ok. I had four 4GB sticks (total 16GB) of the G.Skill Ripjaws. I replaced Channel B with two 8GB sticks of the Kingston making the total 24GB. After the upgrade I started getting a BSOD. Sometimes after a few hours, sometimes longer. Before the memory upgrade I never...

Hi, Any way to make these two DDR3 sets more compatible? Seems one set is CL11-11-11 and the other CL11-12-12. I'm getting an occasional BSOD. Thanks. MB Gigabyte GA-Z97-D3H CPU 17-4790K Memory 16GB DDR3 OS WINDOWS 7 https://www.newegg.com/g-skill-8gb-240-pin-ddr3-sdram/p/N82E16820231468...

Goes to Start Up repair if Boot Mode Selection set to UEFI Only. And that is with the 1TB drive disconnected. Thanks anyway.

ok

And?

Disk 3 is the Samsung

HDD BBS Priority and Boot Options are not the same. Some BIOS have a HDD BBS Priority menu. This BIOS does not

BBS Priorities?

Should I just Disable the Storage Boot Option Control?

Boot Option 1 selects the OS (boot manager) drive. All other options are disabled. I can only boot with the 1TB storage disconnected. I can connect it via USB after Windows starts. If I have the 1TB storage connected and access BIOS..... Boot option 1 still has the correct drive selected but...

I have a new 1TB Samsung storage ssd drive that has no OS on it yet my PC wants to boot from it . I have removed it and set it up via usb SATA but still the PC wants to boot from it. I must disconnect it for the PC to boot from the drive set in the BIOS . Never had this issue in the past when...

OK Just set the Voltage manually. Thanks.

I did add a new tower cooler. Maybe that? All I can think of.

it's set to Auto. I have no Idea why it reads higher than 1.5V. But it was 1.608V a few years ago and now it's 1.668V. I dont know why it has increased.