Recent content by Hugo Bryan

  1. H

    [SOLVED] Custom watercooling at high temperatures

    I can see the water flowing all over the tubes and the reservoir. I'll definitely try to change the voltages once I got home Thanks for all the answers
  2. H

    [SOLVED] Custom watercooling at high temperatures

    I don't have any documentation on the CPU block sadly This Watercooler kit was a gift and came with nothing
  3. H

    [SOLVED] Custom watercooling at high temperatures

    Yes, I did see the water flowing into the resevoir; Nope, i didn't see any "inlet/outlet" mark on the block; I can't answer about what kind of block or pump it is, I just know that it is a SC600 DC 12V water pump; Room temps about 24-27C, yes it is a 240mm rad; I'll check the thickness once...
  4. H

    [SOLVED] Custom watercooling at high temperatures

    Nope, running stock at 4.5ghz and 1.25vcore
  5. H

    [SOLVED] Custom watercooling at high temperatures

    I used this CPU for months with air cooling with high temps such as 80-83C So maybe because of this i'm having such high temps now?
  6. H

    [SOLVED] Custom watercooling at high temperatures

    That's weird, i'll try that
  7. H

    [SOLVED] Custom watercooling at high temperatures

    Hello, I have just built my first cutom water cooler I believe I've built it correctly The problem is, while idling the CPU temps goes arround 33-36C While gaming it goes to 70 instantaneous and stress testing it goes to 75-76C Here's the things i've tried so far: Check thermal compound and if...
    • Hugo Bryan
    • Thread
    • Custom Water cooling Water Cooling
    • Replies: 16
    • Forum: Cooling
  8. H

    [SOLVED] GTX 1070 MINI with a NZXT KRAKEN G10

    Hello Im looking to water cooler my GTX 1070 but I've got some doubts that i couldn't find a asnwer yet My GTX 1070 is a mini version from Zotac (This one) I don't know if those mini cards, specially mine, will be compatible with the NZXT KRAKEN G10 and a CORSAIR H55 I really don't wanna buy...
    • Hugo Bryan
    • Thread
    • gtx 1070 mini watercooling
    • Replies: 2
    • Forum: Cooling
  9. H

    Question I5-8500 temp confuse me

    90C is too hot for a 8500, i guess the pc turns off at 100C for safety reasons In my point of view it could be two things Cooling or thermal paste What cpu cooler do you have? have you checked at what speed the cpu fan is running while on load? what type of case are you using? Have you ever...
  10. H

    Question Would the G4560 bottleneck my Rx 570 4gb

    Yes, absolutely but for fortnite you wont be seeing any major peformance issues
  11. H

    [SOLVED] Getting BSOD all the time after changing hardware

    Guys, a little update I did some deep research about what can cause the "DPC watchdog" and the "irql driver_not_less_or_equal" BSOD. Turns out people were getting this after overclocking theirs cpus, mine was at stock at 3.50ghz so I overclocked to 4.2ghz and changed the core voltage to 1.33v...
  12. H

    [SOLVED] Getting BSOD all the time after changing hardware

    No, basically there's almost nothing running besides windows default programs I just finished this installation yesterday
  13. H

    [SOLVED] Getting BSOD all the time after changing hardware

    Version 1809 I did install all updates
  14. H

    [SOLVED] Getting BSOD all the time after changing hardware

    Yes, I did, i installed every single driver from the manufacturer
  15. H

    [SOLVED] Getting BSOD all the time after changing hardware

    Yes, 100% clean installation
See more
COMPANY
RESOURCES
FOLLOW
Top Bottom