Recent content by Jacob Harris12

I tried setting them to high performance and I went back and tried a hand full of drivers. Just for fun I upped the power draw limit on my card and nothing made a difference. I'm thinking about having a local repair shop take a look at it cause I'm running out of ideas.

I only have one monitor. And yes in windows power plan you can change it to high performance. Also the crashing only occurs in some of my games. I have been playing Modern Warefare 2 for multiple hours with no problems.

After testing each stick of ram passed Memtest86+

I have two kits of this https://www.amazon.com/gp/product/B07TC4TPCN/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1. I know I shouldn't have two seperate kits in there so I pulled one of the kits out and ran them at stock speeds and still had the crashing. I am going to start the process of...

I have windows on a WD_BLACK SN750 NVMe SSD 1tb. I ran the SMART Diagnostic and it came back with no errors. And the drive shows 99% health.

My computer was running perfectly fine until a few days ago when it started crashing shortly after getting into high load games. For example in Forza Horizon 5 sometimes it crashes right when I load into the game and sometimes it can take a min. Sometimes I can play however long I want and it...

So after following all of your instructions still no luck. I also tested each stick individually and each slot and each producing the same problem. I looked on Asus's website and my ram kit isn't officially supported so I suppose that might be part of the problem. If you have any other ideas i'd...

Here is the link the ram kit I currently have in: https://www.amazon.com/Corsair-Vengeance-PC4-28800-Desktop-Memory/dp/B07TB4J2DD/ref=sr_1_3?crid=YCJ8DXTYON6F&keywords=4x8gb+ddr4+3600mhz&qid=1673385853&sprefix=4x8gb+%2Caps%2C135&sr=8-3&ufe=app_do%3Aamzn1.fos.f5122f16-c3e8-4386-bf32-63e904010ad0...

I recently upgraded to 4x8 of Corsair Vengeance RBG Pro rated for 3600mhz on my system. When first installed and turned to its rated speed of 3600mhz my system wouldn't boot. I fixed that problem by updating my motherboards BIOS to the newest version. The computer works as it normally should...

It is a Xbox One Controller the problem is the button to make the controller sync isnt working

So this might be a lost cause but the sync button on my controller is not working. My pc has Bluetooth on the Wi-Fi card but I can't connect it without the sync button. I have tried to plug it in with a cable to see if they would sync but no luck. I have a microsoft wireless adapter that I can...

Well I got the new motherboard and everything is working perfectly. Again thanks for all the help.

Well I think I will just get the motherboard replaced. Thanks for all the help and I will tell you how that goes once I get it.

Well before Well before I saw this I took out my m.2 and plugged in another empty HDD. Fresh install of windows from a USB. That didn’t solve the problem. I dad what you suggested with the RAM and didn't notice any problems or fix anything. I did notice that not every time but pretty often...

Actaully it is a NVME so I did make sure RAID was disabled and it was so no luck there. The SSD was on gaming mode so I turned it off and no difference.