Recent content by JakeFromAfflack

So I did all these, fresh install windows, updated bios and all drivers and now I’m getting about 60 fps less than before cpu temps idle around 70 and don’t go above 80 and when gaming it shows gpu usage and cpu usage both only around 40%. Any ideas? Also only running two sticks of ram from the...

hi tom , i had same exact problem, was running the hero, 7950 and the strix 4090. from what i can tell the mobo is the issue, not sure what exactly is causing this but i even tried two of these hero mobos both with no luck, i went out and got an msi ace and sure enough all my problems were...

so after pretty much trying everything possible i had no luck, after some research on rogf forums i found that someone else was having the exact same problem and they had the same exact model gpu and mobo, i belive the gpu is working good as i put it in my friends 5900x pc and he was getting...

Hi Tom, I’ve got the same issue and same specs rog 4090 rog hero x670 and 7950x Wondering if you’d any luck fixing this. also do u have any issues with windows freezing or lagging a Ton right after u log in?

Update: I have tested everything you had mentioned from installing drivers directly from manufacturers to using just one set of ram etc. I’ve began testing hardware now with another 7950 the problem occurs, I have also ruled out the motherboard as I’ve tested another of the same exact model...

Yes. Two seperate kits same serial etc. but I have tried with just one kit and no luck still even after resetting bios etc

https://www.gskill.com/product/165/390/1662622003/F5-6000J3238F16GX2-TZ5NR-Overview Have 4x16

I have a windows boot usb that I use to install windows I made it a year or two ago, if I use my bios to wipe the drives should that be fine? I will try once doing all this if no luck I’ll begin testing hardware, luckily I live 15 min from a microcenter where I can just buy parts one by one and...

This being said at what point could it be assumed that hardware could be at fault, should I maybe try testing a different cpu or motherboard or even psu at this point?

I was on windows 11 when the problems first arose but I’ve since been using windows 10 for all testing etc. I will probably try a fresh sip of my pc seeing as I don’t have too much downloaded and will also not download Armour crate on this run around and download all drivers as you said.

I’ve restarted my bios, so far no change windows startup was very laggy same as before and cpu temps still hanging at 62. I’ve got all drivers in Armour crate updated but haven’t done anything else outside of Armour y crate other than GeForce, is there a chance I’m missing some sort of cpu...

I have not been home yet to try this but should I completely wipe and reinstall windows on my drives as well just to fill that out when I do the bios reset as well?

After the bios update the startup process from power on to entering bios seems to be wayyyy faster. Windows startup processes seem to have stabilized but still a bit laggy for a moment or two. Cpu temps still idling at 60c, only have cod downloaded at the moment and it is currently updating so...

Ok, I’m going to start with the bios update as that is the right mobo, will follow up with the rest

I have checked the connector, there are no signs of melting and I have made sure it is completely seated. there is one other drive wd black sn770 as well but I have yet to partition it so it isn’t currently being used. It is a 4x16 setup both sets of two bought at seperate times, after now...