Recent content by jerramie

SWG best game ever... though it cant be on that list...its MMORPG but.. still... what ever happend? they wrecked it and then gave up on it... a perfectly good game that should not have been touched

yeah those temps may be within range but they should not exist @ idle. While playing BF4 settings ultra I have fans running 100% and have an average temp of 50c. With my computer @ idle just sitting there showing desktop or an open web page - the GPU is so cool that the fan doesn't come on. I...

Consider this: I have owned many many gpu's I have 2 nvidia 6800s that i purchased when bf2 came out! thats old. The first gpu i ever got was actualy not a gpu but a graphics excellorator. the 6800s still work perfectly. I never ever oc'd them. My brother is well off with a very very good job...

I have a Gigibyte 78LMT-USB 3.0 v6 MOBO. i have been doing this for the past 25 years but, for some reason.. i have never set up a raid array!:ouch: I understand what raid is, how it works and why but I have no experience with this type of setup. I have a boatload of drives I have scavenged over...

This could be due to the phones Operating System (kitkat, microshaft, Android etc). The OS more then likely has allocated space on its drive as 'system reserved'

you list specs without GPU... so I am confused. Do you have a GPU or are you using onboard GFX? Most of the time you can not use both. Usually (but not always) the mobo will detect PCI EX card and disable the onboard. This is what I would do: If you have a PCI GPU card - remove it. Enable...

You may never be able to push the memory that high with the chip you have. have you tried unlinking the memory before OC it?

"Easytune 6 doesn't alter bios settings - its software based only" if this is true... then how does the BIOS post 1866 before ANYTHING on the HDD is loaded? Just trying to understand : ) Maybe..... ET6 directly alters and saves the value in the BIOS. ET6 is after all bundled with the mobo

Checked again for error correction: Open ET6, click on tune, click on advanced, move memory slider to default. restart computer. Bios post memory running @ 1600. UNGAN . start windows, open ET6 click tuner, click advanced, move slider to 1866 (or where ever you want) SAVE. exit. restart...

loaded easytune, moved slider to default. saved. restarted computer. ram posts in BIOS @ 1600. Windows loads. Pulled up easy tune. moved slider to run @ 1866. Saved. exit, restart computer. Bios posts @ 1866.

I would consider a power problem. try to remove or disable everything you can i.e. PCIX GPU (if you have one) PCI sound (same) all but boot drive. disconnect power from CD/DVD/Blueray/"insert updated format here" You may think "why? my PSU ran my previous board just fine" but things have now...

Think ill run some tests with 3dmark and PCIx ill run them in 5 mhz incr

<< go to ASUS website, order BIOS chip for your board, It costs about 2$ so get 3 of them. Have them shipped. When they come, pull the BIOS chip out of the board. It comes out very easy. it is basically just laying in there. Install the new chip in its place. Make sure they do not send you an...

grande master is correct. I see many posts about people saying they cant get he board to post the memory @ 1866. The board WILL run memory @ 1866! mine does I am running same board. BUT as Grand says... has to be AM3 or better (currently) I am running AMD FX 8300. It posted the memory @ 1600...

YES! I have same board. It is running Kingston HyperX fury @ 1866. But it did not post that way. Originally when i built it, i had to use the utility that came on the MOBO install disk. It is called "EasyTune6" Install that utility, click on tuner tab, click advanced, change memory from 1600 or...