Recent content by jimbha

Also my other specs: cpu:FX-8120:) mb:asus m5a78l le ram:12gb psu:500w corsair.

I just hooked up a Sony 42" Full HD 60Hz tv to my EVGA gtx 970 acx2.0 and after that my clocks have been really high. My main monitor is 27" 1920x1080 60Hz and my second is 22" 1680x1050 60Hz. If i unplug the Sony tv my idle clocks come back to normal about 300/300MHz but if the TV is plugged in...

What version of CAT cable are you using? try changing the cable or different port on your modem.

I dont know if JUSB is the proper name of those but someone said it is xD

Those pins in your motherboard where you can plug front usb and aftermarket usb hubs.

Hi guys! im just wondering about the quality on JUSB connecter on a motherboard (those pins). So my motherboard is 2.0 USB supported not 3.0 so is the JUSB plug the same you would find in back of your motherboard or is it something like usb 1.0 only? i currently have one of those usb cards that...

Yes its accually even bit too much xD something like 450 would even work but 550 for that setup is just good.

yes it will fit but still go with the 2 fan card 3 fan card might be too big..

I would say 600-900 $

I would get new cpu (at least gtx 970) also what is your psu?

Yes it will fit in your case and it is compatible with your modo aswell! :)

i would buy Noctua NH-L9a.

And if your planning to do heavy editing etc i would recomend at least 16gb of ram but for gaming and light editing 8gb should be fine.

everething looks good but... psu is too low for that setup tho i would get at least 700w psu but everything else is fine.

No it will not but keep the 1 ms monitor on your main because its little bit faster even that you wont maybe even see that...