Recent content by JJBolas

Well thank you all, I ended up returning the RAM and buying a different kit (2x Corsair Vengeance LPX 3600Mhz 2 x 16Gb) and it's working fine

Not sure what you asked then, I tried a single crucial stick in each slot with the other slots empty and none booted up

I don't have windows installed on this machine but I will try to see it Already cleared CMOS and as I said in the post it does not boot with a singe stick of crucial: C X X X - No boot X C X X - No boot X X C X - No boot X X X C - No boot

I have just set the frequency to 3200Mhz manually and it booted (With one stick G.skill and 3 Crucial)

The 2x16GB kits are so much cheaper here... It shows as 3200Mhz but running at 2133Mhz and yes it does detect as a 16Gb module

Can't I mix two similar kits? They're the same spec, same model and I'm putting them in the right slots (kit 1 in slots 1 and 3 and the other kit in slots 2 and 4)

Yes, that's the correct motherboard. These DIMMs do not appear on the MSI website but if I go to Crucial website I can see that this RAM should be compatible with my Motherboard (https://eu.crucial.com/compatible-upgrade-for/msi(microstar)/z270-tomahawk) Since I'm trying to fill the 4 DIMM...

Thanks! I'm using the latest available at MSI website

Hey I have an old MSI Z270 Tomahawk board on a computer (Specs ate the end of the post) that I'm using as a server. Today I decided to upgrade the RAM for it and got stuck on this bizarre issue. The board has 4 DIMM slots, the old memory was 2 x 8Gb G.SKILL Ripjaws V 3200Mhz and the upgrade is 4...