Recent content by JOLO14

  1. J

    pc start without pressing start button

    I just tried to disconnect the whole front panel (+HDD LED-, POWER, RESET, +LED- ) and pc still start automatically without pressing start button on the case.
  2. J

    pc start without pressing start button

    Hello, as title says , i have this weird problem. Aftet i plug in the pc to electicity, it starts without pressing start button on the pc case. Only thing i found in bios related to power management was : "restore AC power lose" , which is already disabled. Pc is brand new. I double check if the...
  3. J

    DDR4 3000Mhz 1.368V

    Any other opinion ?
  4. J

    DDR4 3000Mhz 1.368V

  5. J

    DDR4 3000Mhz 1.368V

    Hello Can anyone tell me if if its ok to have 1.368V ram voltage. As you can see from images, i just chose XMP profile 1, and it should run at 1.35V. however, there is set 1.35V but bios measure 1.368V. Is it ok, or i should disable XMP. http://imgur.com/a/Jiuhs http://imgur.com/a/fUB1t...
  6. J

    adaptive voltage i7 6700k

    But , i dont wanna use offset because i tried it, with offset voltage like +0.005 and it gives me 1.42V in windows so i almost burn my cpu. I hope cpu will be fine, it was on that voltage for 1 min. And when i use adaptive voltage with 1.245 and +0.003 system is stable but in load, sometimes it...
  7. J

    adaptive voltage i7 6700k

    Hello Can anyone tell me how for the god love , does adaptive voltage works? Got i7 6700k , ASUS Z170 pro gaming, DDR4 3000Mhz, I tested that at 4.4 GHz on manualy voltage set at 1,245 V in bios, i get 1.248V on idle and 1.264 - 1.280 V in Realbench and in AIDA64 stress test. Everything is rock...
  8. J

    install win 10 on unlocated space on SSD

    U were right, just checked it at disk management and there are 4 partitions, windows instalation created it automaticly
  9. J

    i7 6700k 1.392V 4.2Ghz

    OK, so i should change voltage to adaptive? btw, just watching temps, and HW monitor say i have 23 degrees celzius on all 4 cores while am typing this (cooler is ninja 4). I just tried aida64 CPU stres - 50 degrees, 4020 MHz and 1.312 V Oh and is it posible to OC procesor to 4.5 Ghz and keep...
  10. J

    i7 6700k 1.392V 4.2Ghz

    Hello, i just build new PC- Asus z170 pro gaming, i7 6700k, ddr4 3000Mhz. I am worried about CPU voltage. Just to see temps, i run CPUZ and i start Prime95. After few seconds, CPU was at 4000Mhz, and 1.392 V . I think its wayy too high for stock settings. What should i do?
  11. J

    install win 10 on unlocated space on SSD

    Hello, i want to ask you. I just build brand new computer, and tried to instal win 10 64bit. I followed instruction and get to the point when you select disk partition where u want to instal windows. There were listed my SSD as 240 gb unlocated space. On some forums i read, that on that screen i...
  12. J

    SWITCH higher latency

    Thank you very much for your time and answers. :)
  13. J

    SWITCH higher latency

    i paste same text twice, my internet froze and send sequest twice. Deleted