Recent content by Jonasmaki

Some new info.. As I now can see the drive on first power on I managed to install windows on the drive and that works. But restarts wont work. So the install was a bit of a mess. Everytime it needed a reboot I had to power off as it went to BIOS not detecting the disk. Then on next boot it...

Has anyone ever seen a disk only be visible at first power up and never after a reboot?

Would you say 550W is to little for the system or is it the quality of that psu that is the problem

Updated BIOS to 4001 CMOS clear after update Changed MB cr2032 battery I also tried with a older graphics card (HD6750 1G GDDR5) to see if the psu would do better with less demand. Same behavior persists: First boot after shutdown from windows it will show the drive. Reboot from windows the...

Do you have a recommendatiom on a PSU? Do you think that the psu can be the source to the m.2 not being detected each reboot? I will try 4001 I did to cmos clearing earlier today but it didn't help. I will update BIOS and to another cmos clear. When it comes to the windows creation media I...

Hello and thank you! I found many interesting articles here and hopes I would get good help. BIOS 3810 PSU is 2 years old Media creation tool from microsoft

Setup: ASUS PRIME B450-PLUS Corsair 16GB (2x8GB) DDR4 2666Mhz CL16 Vengeance AMD Ryzen 5 2600 3.4 GHz 19MB ASUS Radeon RX 580 8GB DUAL OC Corsair CV550 550W Corsair MP510 1920GB NVMe PCIe Gen3 x4 M.2 SSD KINGSTON 120GB SV300S37A120G with windows 10 boot In the end I want to replace the...