Recent content by Jootsu

  1. Jootsu

    Question No signal display

    Oh also, the PC is new, though it is prebuilt. The seller also said that the PSU just got replaced by a brand new one that I mentioned above. After some narrowing, I think it is either the GPU or the PSU. Lot of people say to look at event viewer to see the recent event that happened to the...
  2. Jootsu

    Question No signal display

    The issue is still there. I will try to continue fixing it tomorrow.
  3. Jootsu

    Question No signal display

    I re-plugged the GPU connector and also putting back the ram, gonna see if the issue is still there.
  4. Jootsu

    Question No signal display

    Ok after listening closely, the fan became too loud and it didn't actually go down to the normal noise. What could be the problem?
  5. Jootsu

    Question No signal display

    The display port is well seated. I just tried changing the port to HDMI and will see the results soon. As for extra GPU for me to test in my system, I don't have an extra GPU. And for plugging the port into the motherboard instead of the GPU is not possible considering I am using the F series...
  6. Jootsu

    Question No signal display

    Yes the fans became loud and then going down to normal noise.
  7. Jootsu

    Question No signal display

    Also additional info, the fan becomes loud as soon as the display shows no signal.
  8. Jootsu

    Question No signal display

    It's still happening, and still the fan became too loud.
  9. Jootsu

    Question No signal display

    I will try it out! I'll comeback with the result soon.
  10. Jootsu

    Question No signal display

    I have tried swapping the port and it still says no signal. As for the temps, the GPU runs in 44-50 degrees idle (normal temp) and the CPU itself runs in 8-20 percent idle.
  11. Jootsu

    Question No signal display

    This happened for the first time. I bought my PC several weeks ago and it went fine until an hour ago. When i turn on my PC all seems fine but after 10 minutes or so the display says no signal and the fan becomes loud for a couple seconds. I can still hear sounds and when I restarted my PC it...