Recent content by Jose Luis Lopes

Hi, a firend of mine recently built his PC for the first time, he did purchase a B450m DS3H mobo and a T-Force Delta RGB with 5V addressable RGB connection, as it happens from what I can understand (I don't know much about the RGB standards myself and got a bit confused on my search) the mobo...

I bothered because in the beggining it wasn't bouncing, it was 40C, then 100, then back to 40, there wasn't 60 or 80 stable temperature ever, but I guess it was the air bubbles trapped in the loop. Yes the 80C was during prime95, during gaming it is now 55-70 depending on the game, so I guess...

@Karadjgne So, I think it was bubbles after all. After a few more shakes I started hearing some "bubbling" (can't really describe the sound), so I left the PC running with a slight inclination over the night, and now it won't pass 80C during a stress test, which I still think it's a little...

what's your room temperature? Remember nvidia cards (most of them) don't spin up the fans before 60C, so idle temperature doesn't matter And your fan setup is a bit weird.... 2 intake fans on the left side? and one "external" exhaust? where? back or top? Can you move those fans on the...

@Karadjgne So, changed the connectors, Pump is now on chassi fan with full speed, splitter with 2 radiator fans on CPU fans on a standard curve, Algo gave it some shake, from what I read having the radiator vertical helps dissipate and prevent air bubbles, that's exactly how I have it, so...

@rubix_1011 It feels like it's vibrating and making some noise, so yeah, I think the pump is good @Karadjgne thx for the input I'm sure the cooler is properly seated, I will swap the connections and and try to release any air bubbles, will update soon

I just changed my CPU cooler from a 212 EVO to a Cooler Master Masterliquid 240, system boot up fine, but now I'm getting weird fan speeds and CPU temperatures (it's an i7 4790k btw) My mobo, an Asus z97-K doesn't have a CPU PUMP header so I plugged the pump into the CPU Fan header and left it...

I'm trying to set up a HDD as a secondary drive, it's a WD blue 1tb, it does show on the BIOS, it does show on the device manager, it doesn't show on the disk manager to assign a letter. Tried updating the driver, unninstaling and installing again, diferent SATA port, different SATA cable...

I think you got it... Checked the SN now and the date of manufacturing is 1711(november 2017), and the BIOS with support for raven ridge was launched early 2018... Damm, back to the store, I think they can update the BIOS there, this build is quite urgent and cant wait for the kit I read about...

Specs: Ryzen 5 2600 Msi b350 gaming plus 2x4gb ddr4 2400mhz gskill ram Gtx 1050ti Seasonic 520W s12 II Tested the system out of the box, no post, no video signal. Already followed every step in "do this before post" At first I thought it was the hdmi-vga adapter that wasnt able to show...

Are all cores active on the BIOS? Can you screnshot your task manager plz?

One question before that, do you already have the card? if not for what price are you going to buy it?