Recent content by jovanovichmichael

Not sure what else to try

Still running half speed with only the m.2

It keeps reverting back to 2x, every time I leave the bios, I am saving the changes each time. I'm using sata ports 3/4 for hdd, so that should not interfere It is the nvme version Using crystal disk 64bit Thoughts?

I got a mydigital 480GB m.2 nvme drive. And I'm using a z270f motherboard and a i7 7700k processor. The drive is only getting 1.3 GB read and .6 Write. Exactly half of what it should It's in the m.2-1 slot, pcie mode is enabled in my bios. Not sure what's wrong If I had to guess maybe...

Well I was told by the manufacturer that the board is ok. So then it seems to be the hdmi cord then? Any other thoughts

So I had mistakenly plugged my case rbg cord that powers lights, instead of my lights, into my rgb header on mobo, and caused a short witch smoked slightly and smelled, immediately turned off CPU. After i unplugged and rebooted the CPU, first a red screen then windows began booting but there...

I figured that I'd set the cooler blowing towards the back since there's only one outtake their, I thought the case could use a little more power pulling air through the whole thing stead of a In the front and out the top, curved trajectory

Is it worth disconnecting a fan to get positive pressure? I'm ok with cleaning the case now and again if it comes to. But what do you guys think about the thermal trade off loosing a fan versus getting that positive pressure

I got a aero cool p7-c1 case, and I'm putting a noctua df15 in it, It has 6 fan slots in the case, for witch I'm getting 6 noctua sa12. My question is how to configure the intake versus outtake fans. There's 3 fans slots in front 2 in top and 1 in back. I am aware of the benifit to positive...