Recent content by jozinovitko

Hey! Thanks for your reply. I know about GPU issues, but when I actually boot ntb is working completely fine for hours, no signs of bad graphics. Checked and switched my RAM a lot of times. Tried other two RAMs too. Nothing really helped with the problem :/

Hey! I have a weird issue. My Samsung 350V5C-S05CZ boots only sometimes. Like one of 10 times when I turn it on. Sometimes it boots 2times in a row and sometimes it doesn´t boot even after 20th time. When it doesn´t boot Leds turn on, fan is working, but screen remains black. It seems like...

Hey! My battery is connected and detected. It says plugged in and 0%, nothing else. No error is displayed even if I scan for problems. It doesn't charge evene 1%. It's kind of strange because last time the notebook was used (before some repairs) battery was working. This actually happened once...

I removed every single part and cable except display, CPU, RAM and MB and it started working. I started connecting everything one step a time and when I connected network card it stopped working again...It seems like network card was the issue, very weird.

I tried replacing RAM with other working 2GB DDR3 RAM and nothing changed.

HDD was boot drive both times when I tried it on other laptops, I am sure it isn´t the problem. My laptop is Packard Bell Dot SE-245CZ. I have only one 1GB RAM, but I can try replacing it with other working RAM if it helps. My BIOS version is V1.15

Hey! I have a weird problem I am battling for few hours. When I start my packard bell laptop and boot bios everything seems normal, but when I proceed to windows loading phase after like 3seconds laptop freezes. Windows recovery freezes too. Can´t access safemode either. I have read a lot of...

PPS: 2additional fans are on 100% too but they arent showed in speedfan

Hey! I have been cleaning my pc from dust. Before that everything worked great. But after that I started my pc and fans were so loud. I launched speedfan and it showed that cpu fan is always on 2700RPM (max), gpu fan works normally and I think at least one of the additional fans that I have in...

Hello! I have two years old Yenkee Ambush keyboard and the "D" key started to get stuck and going back slowly and also it makes different sound as the other keys. I checked a lot of forums and cleaning dust worked for almost everybody. So I tried to blow out the dust. I used the compressed air...