Recent content by K6-II

Also check your firewall, try running the game with firewall off and see if you still have the issue. Is it happening with any game you play?

You can run it under the floor if you like the cable will sit nicely into the foam and there are no stress factors to worry about. There won't be any issues concerning EMI/RFI From my point of view I find this option much better than running along the wall. Cheers

What type of account has minimal privileges in Windows 7? Standard User or Guest account Thank you

see if other devices work I would try to reinstall the network driver, might be corrupt

I would certainly give it a try with another 4Gb stick in dual-channel, also make sure you have your windows and video card updated. Some games might not be optimized for single channel

I think the issue is with the memory anyway. Your motherboard supports dual-channel RAM, on the Corsair website I found your model and says "Designed for use with all DDR3 motherboards with one memory channel" Check this link...

Did you installed the RAM correctly?there should be instructions in the booklet that came with the motherboard your computer might not like running with only one module of RAM more work load for CPU (high temps) Did you get any BSOD messages. Get another stick of RAM and make sure you'll get the...

I'm glad you find a way to cool it down, record the temps you are getting now wait couple of weeks until the paste settles and solidifies and look at the temps again see if there is any difference. P.S You still need to get a cooler Cheers

OK the idle temps seem ok, considering you're living in a warm environment and using the stock cooler another thing you need to consider is the airflow inside your case. You might adjust the fans profile with H/W Monitoring, your motherboard should have this features: System voltage detection...

Maybe I'll annoy you but I wanna make an idea of your problem Have you got an aftermarket cooler or stock? Is your system overclocked?

Apply the cooler with its own paste Check the temps Don't overclock strait away leave it for a few days until the compound dries Check the temps again