Recent content by KennyLee86

So I pulled it all out, used one ram stick one cpu old fan, and old power supply. Then power supply stayed on, fan stayed on, and one ram stick stayed lit up. Removed all storage disks. So it works with minimal connections

So I pulled it all out, used one ram stick one cpu old fan, and old power supply. Then power supply stayed on, fan stayed on, and one ram stick stayed lit up. Removed all storage disks. So it works with minimal connections

What pins were bent? The ones under the cpu?

It’s installed, but wondering if it has to do to the ENERMAX not having the led properly connected? Maybe motherboard shuts down because it doesn’t read a cpu fan properly?

Building a new computer Flicks on then off, repeatedly. After I turn off the computer, RGB ram sticks light up. rough build, can give exact components if need be. i9 Msi-790 motherboard Rtx 4090 Couple nvme sticks Enermax liqmax 3 cpu cooler (just using cooler hooked up to pump pins on...

Building a new computer Flicks on then off, repeatedly. After I turn off the computer, RGB ram sticks light up. rough build, can give exact components if need be. i9 Msi-790 motherboard Rtx 4090 Couple nvme sticks Enermax liqmax 3 cpu cooler (just using cooler hooked up to pump pins on...

I did have 1 SSD and 1 (2TB) HDD I Just cloned the 2TB drive to a new 8TB HDD. So now i have 1 SSD and 2HDDs in my computer currenlty. I want to replace the 2TB harddrive with the 8TB harddrive. so i can remove the 2 TB HDD and clear it and use it on another computer. But in the disk...

My 2TB drive has mostly vids and games on it for youtube/streaming/etc. Just trying to upgrade to a slightly faster HDD and bigger. I have 8TB cloned already, just wont come up properly under disk management

So i have a 2TB HDDs that i want to CLONE to an 8TB HDDs drive. These are secondary drives as my OS is on a smaller SSD.

Cloned my harddrive through ETCHER and when i go to disk manager its says its "unallocated" but if I initialize it, I have to format it?? How do i make it into a usable drive without wiping it?

Okay i got the 8 GIG WORKING finally.. But so i can just format the old drive in the new PC and it should work fine?

MQ04ABF100 Toshiba 1TB/1000GB 5400rpm Sata 7mm 2.5" Hard Drive 128mb, 6 Gbit/s. The next problem is, when i put in the 8 GIG to replace it. I Cant intialize the new HD

Trying to format an old HDD to put in another computer. But i keep getting the error like.. "cant format because programs being used by this HDD." Ive removed the HDD and my computer still boots up!! so IDK whats holding it up? it doesnt have my OS on it and it wont format! Ive tried changing...

I have multiple GPUs on a mining rig, 4 right now. Only 2 will mine currently. If I swap some in and out no matter what only two will mine at same time. Help!!

Intel Core i5-9400F Desktop Processor 6 Cores 4.1 GHz Turbo Without Graphics nevermind think this one supports z390 chipset think its 9th gen?