Recent content by kiddscoop

I'm pretty sure you can just use all three without losing performance. It's a DDR4 mobo so it will handle all 3 ram sticks

Did you double Check to see if you installed the motherboard on the case correctly? Try removing the motherboard from the case and put it on like clean hardwood floor, free from touching any metal, and connect the CPU, PSU, and HS/F to see if it powers on

after my old motherboard died, I decided to get an old one that gets the job done. So I then installed everything, double checked to make sure everything was connected correctly. I turned it on using two screwdrivers (don't have power SW yet) and it beeped three times. Turns out it was the ram...

I recently ordered a new CPU, and motherboard. When I connected my setup, it wouldn't even post, and since it's an older mobo, I don't necessarily know why. My build is Intel D946GZIS mobo Intel core duo E7500 2.93MHz Cool master v8 2 2MB 800MHz Corsair RAM 500GB Western Digital HDD 750W PSU

Realized I could have used the two pin power connector with two screwdrivers.

I got a new motherboard and there is no power button like on my previous one. How to turn on?

So I recently was given a custom built PC, and I'm new to all this computer hardware stuff. So about a week ago I've been having a C1/1D error without POST, and I've otried everything. Reseating RAM, unplugging everything and reconnecting it, removing the CMOS battery and putting it back. When I...