Recent content by Klebermo

I have this components in my system: Motherboard knup revenger h110 CPU Intel core i3-6100 2x HyperX 8GB GPU geforce GTX 1650 ( also tested with Radeon RX 550 and internal graphics) nvMe WD Green 240GB Psu XFX XTR2 850W When I try turn on, I get one inicial beep, a pause, and 3 short beeps...

I add Photo and POST with model of the psu. I have tried start the system with no nvMe.

psu is XFX XTR2 850W

It is. What you think is missing?

Everything I have installed is listed on the bottom of the original post

View: https://youtube.com/shorts/xICqgFWhVfw?si=UPL_00qWesp5QcYY First I thought this could be 1 long beep and 3 short beeps, indicating an issue with the graphic card, but now I am not sure the First beeps is a longo onde. I also thought the First beeps was not parte of the error, making...

It was working with the Asus board before.

Yes, It was working in this board before. But not anymore.

I have this Core i3-9100f CPU which was working normally on an Asus Prime Z370-A board, but right now I have a problem when I try this same CPU with these two boards: 1) Asus Prime Z370-A 2) Knup Revenger H110 With both boards I get an error that In my searches seems to be related to a...

The CPU does not have an integrated Gpu, because. I already tried remove The Gpu, clean it The slots and conector, and instala again.

After build a system with this Motherboard, a Intel ore i3-9100F CPU and a Geforce GTX 1650 CPU, when I try turn on the system, I got a longo beep and three short ones. I was unable to find the exact meaning of the beeps for this Motherboard, but some sites in my search are saying this...

I have a PC with the motherboard Intel DZ68BC which was wroking fine for a long time until recently, when the motherboard stop be able to initialize. In the board's lcd, the Port 80h POST Code displayed is 15 for a few seconds and after that change to 20 forever (I need shutdown manually). that...