Question possible problem with graphic card with Motherboard knup revenger H110

Klebermo

Distinguished
Apr 23, 2016
3
0
18,510
After build a system with this Motherboard, a Intel ore i3-9100F CPU and a Geforce GTX 1650 CPU, when I try turn on the system, I got a longo beep and three short ones.

I was unable to find the exact meaning of the beeps for this Motherboard, but some sites in my search are saying this is a problem with the graphic card.

The graphic card was working Fine in another build (with a different Motherboard). I have tried another GPU with this Motherboard (Radeon RX 550), and the some sequence of beeps ocurred; because that I suspected the information I get about the meaning of this beeps was correct, but I was not able to find a confirmation anywhere.

Is this really the case? Anyone can give any tips of How to fix that?
 

KingLoki

Upstanding
Jul 10, 2024
489
77
270
Normally error codes for the GPU. Remove the graphics card and then reseat it and check its fully positioned and seated in the mobo slot. If you have an inbuilt graphics on the motherboard, go into bios and turn off.

If there is an inbuilt gpu, and it is already turned off, then turn it on and connect the video cable to the motherboard graphics to see if that works.
 

Klebermo

Distinguished
Apr 23, 2016
3
0
18,510
The CPU does not have an integrated Gpu, because. I already tried remove The Gpu, clean it The slots and conector, and instala again.