Recent content by Kremo

  1. Kremo

    Question Defective RTX 3060Ti?

    Relevant System Specs: I5 12400 Asus TUF B660 Plus WiFi MSI Ventus 3x 3060Ti 16gb Cosrsair LPX 3200Mhz RMX 850W 2x 1440p LG 27GN800P-B 27" UltraGear FreeSync Hi everybody, i'm posting here today as something of a final resort relating to my MSI Ventus 3x 3060Ti. I've had this card for a year...
  2. Kremo

    Question System is performing below average in 3DMark ?

    Relevant Specs: MSI Ventus 3x RTX 3060 Ti LHR (OC) Asus TUF B660 Wifi Plus Corsair Vengeance LPX 3000Mhz 1tb NVME WD SSD BeQuiet Dark Rock 4 Hi guys, I recently built my system and have been getting unsatisfactory results in 3D Mark TimeSpy and was wondering if somebody could help me "close the...
  3. Kremo

    [SOLVED] XMP isn’t working with my ram.

    Updated the bios to the latest version. Still nothing, any other suggestions?
  4. Kremo

    [SOLVED] XMP isn’t working with my ram.

    Hello all. I’m struggling to get my ram to run at it’s intended speed and I was wondering if you could help. I have a set of 2 x 8gb LPX 3000Mhz from Corsair but even after enabling XMP its no bueno. It’s currently maxing out at 2,128. CPU-Z is also showing 1066 JEDEC. The ram is sat in DIMM...
  5. Kremo

    Question I ran into a couple of issues when installing my board.

    Hiya folks, it’s been a minute since i’ve built a PC and I encountered a couple of issues when installing my motherboard. 1.) I think I scratched the mounting holes on the board and now there’s some metal exposed. Please see below for images https://ibb.co/3sKsq95 https://ibb.co/VY9XfzN I...
  6. Kremo

    Name change request.

    Hi, is it possible to get my name changed to one of these in this order if they're not taken: Fly Kremo Kevit
  7. Kremo

    [SOLVED] Delay when starting PC after resetting PSU?

    No GPU as of yet, bios version is American Megatrends Inc. 0418, 12/10/2021 I think? Sorry if that's not the correct thing. This actually isn't the only cable with sharpie marker inked onto it, weirdly the CPU had a golden marker pen print on it. I did clean it off but documented it beforehand...
  8. Kremo

    [SOLVED] Delay when starting PC after resetting PSU?

    Basically, whenever I turn my PSU off, then turn it back on, I have a 5 second delay until the computer actually springs to life (Fans spin, LED comes on, system boots). After that, the system will boot normally until the PSU is reset again. This ONLY happens when the PSU has been turned off and...
  9. Kremo

    [SOLVED] Adhesive oozing below CPU lid after cleaning with alcohol wipes.

    Yep one of my friends just pointed this out too, seems like this is absolutely normal for 12th gen chips, even down to the very location and manor at which its oozing. I guess there's nothing out of the ordinary here, thanks!
  10. Kremo

    [SOLVED] Adhesive oozing below CPU lid after cleaning with alcohol wipes.

    As the title states, I have a brand new CPU that i'd used for around a week before deciding to order some better thermal paste. I removed the CPU cooler, and used noctuas alcohol wipes to clean it down, after applying the new paste I realized the ahesive that holds the lid onto the cpu is oozing...
  11. Kremo

    Odd clicking noise after instaling SSD's?

    Yeah i know that, but the only question is what D:
  12. Kremo

    Odd clicking noise after instaling SSD's?

    Hi guys, so basically as the title states, i've installed 2 SSD's about a week ago, and every since i've been hearing this weird clicking noise, it happens randomly but usually once every 10 minutes, there is no cause to this clicking noise, and it doesn't follow any patterns. I've left my case...
  13. Kremo

    Power Supply making odd noise.

    (I've copied and pasted this from another forum as I've waited 24 hours and nobody can give me an answer, hopefully the pro's here can help me out) So about 90 percent of the time, I get this weird noise coming from my powersupply, I can only hear it when the PC is turned off so I don't...
  14. Kremo

    Can't set ram to XMP?

    Okay, so i'll start with some specs, I have : Z170A-PC MATE VENGEANCE LPX DDR4 I5-6600k So basically, when I enter my BIOS I have two options at the top, one of them is "OC MODE" Which boosts my CPU to 4.2 Ghz from 3.5 Ghz, and the other option is "XMP" which will set my ram to XMP settings...