Recent content by lemontea

  1. L

    No display but PC is running

    http://oi65.tinypic.com/23r8ort.jpg Short number 11 pins to clear cmos Clear RTC RAM (2-pin CLRTC) This header allows you to clear the CMOS RTC RAM data of the system setup information such as date, time, and system passwords. To erase the RTC RAM: 1. Turn OFF the computer and unplug the...
  2. L

    my laptop can't find hard drive

    What happen when you start your laptop now? Any error or message on screen? I think you should check your hard drive using some bootable disk checker like minitools partition wizard bootable or hdd regeneration from bootable usb disk to scan your disk from error. If no sign from your disk I'm...
  3. L

    No display but PC is running

    You can check how to reset cmos on the manual book of your mobo or just remove the battery for few minutes cos you don't give us any clue about your mobo type and brand
  4. L

    Is it safe to test a broken motherboard?

    Well i said that because i have 2 broken motherboard and one motherboard can be fixed (ram slot problem) without any issue and the other one killed my CPU (cos i can RMA the CPU so no big deal) . The question now is, are you prepared with the risk? :) . Curiosity worth the risk if you don't have...
  5. L

    No display but PC is running

    reset cmos and taking out GPU and one of your ram if you have 2
  6. L

    my laptop can't find hard drive

    - It's really blue screen or BSOD what the messages? - Your hard drive does not recognized in bios but you can go to recovery windows?
  7. L

    Is it safe to test a broken motherboard?

    maybe yes maybe no, you know the risk like you can kill your cpu if something wrong with what you going to do
  8. L

    Help checking my motherboard

    Problem solved, the motherboard was dead or shorting out that's why my psu not even running (bought new motherboard that's why i know that's the problem)
  9. L

    Help checking my motherboard

    I'm pretty sure decent psu can post or at least go to bios with this type of motherboard, but in my case any psu can't power up this motherboard, i mean the psu not even respond at all just silent, no fans spinning but working on paperclip test and on other PC. I'm not asking it's good or bad...
  10. L

    Help checking my motherboard

    It's corsair tx750 bronze, 2,5 years pc with no problem, using 4690k oc 4.4Gz gpu amd 270x. I'm testing using paperclip test, and try using other psu from another pc
  11. L

    Help checking my motherboard

    Hi, i have msi z97 gaming 3 and while in gaming it suddenly shutdown by itself, and i can't power on my pc anymore, nothing, no fan spinning, no post no bios loaded, no light completely silent. I have test that the psu fine i even test using other psu but still silent when i turned it on, but...
  12. L

    I just wondering about CPU-Z stress test

    I'm using noctua nh-u14s, 4.5gz can run only without BSOD if i set to 1.3v. I've tried prime95 and aida 24hours but when i clocked to 4.4gz 1.255 (turned out it still unstable for gaming so i added more volt 1.275) . For 4.5gz with 1.3v i don't want to risk using prime95 because the temp...
  13. L

    I just wondering about CPU-Z stress test

    Yeah i understand that it doesn't give you heat that much like other program does, but i can accept that since real application will not generate too much heat and maybe their calculation different with other stress testing program and i know passing prime95 all day doesn't guarantee my pc can...
  14. L

    I just wondering about CPU-Z stress test

    I got 4.5Gz overclocked 4690k 1.280v DDR3 1600, it's fine running 10 run intelburntest with maximum stress level (6Gb), AIDA64 fine for half hour. I just want quick result so i don't use prime95 all day this time because some say intelburntest is more accurate and fast detecting instability, but...
  15. L

    CPU upgrade TDP 65w Q8400S or E8600

    So, i just sold this PC few days ago and changed to Dell optiplex 780 USFF, basically it's the same specification as the DC7900 and the difference just the ram that i'm using now is DDR3. Back to the thread i think the problem is in the browser, i'm using Chrome (32bit/64bit) and watching this...