Recent content by Lozzano

it was done while trying to put back the heatsink on ( not by me ) and there is nothing else on the board that is broken that is visiable atleast, but no missing components or such. Problem with a tracer pen is that the 2 lanes are so small i will not be able to do them seperately without...

install hardware monitor and observe the temps of your GPU in idle and full load and report back. it can be many things such as temps, bad windows files, bad drivers, bad chip (GPU), bad PSU, bad CPU. waiting for an answer.

try it in another machine, im pretty sure you got a bad chip on that GPU, the reason is that the GPU get so warm over time that the solder gets small cracks in it or loosen from the connection on a microscoptic level and reason for this is because of the how law is, they are not allowed to...

Hello, it sounds like you are out of luck, i think your GPU has become so warm that it needs to be re-soldered for it to work again. The 525m is a rebranded 400 series and the 400 series was a very warm GPU and specially in the laptops, i know because i work with compuers and alot of laptops...

Hi, i have this strix 970 with 2 tracer scratches, the copper is exposed but it is unclear how deep it goes due to the tiny size of the board and tracer. the gpu gives no image, i wonder if this could be why and if this can be fixed ? See picture. https://ibb.co/b1fzf5

Hi, i have this strix 970 with 2 tracer scratches, the copper is exposed but it is unclear how deep it goes due to the tiny size of the board and tracer. the gpu gives no image, i wonder if this could be why and if this can be fixed ? See picture. https://ibb.co/b1fzf5